Filter
Top Products
HMP Linux 1.2 Release Update, Rev 05 — September 2006September 2006 43
3.5.2 Continuous Speech Processing API for Host Media
Processing Demo Guide
The Continuous Speech Processing API for HMP Demo is designed to run using a series
of four or fewer contiguous channels. The highest channel number in the series must be
120 or lower. Attempts to run the demo using a channel number higher than 120 will
cause the demo to fail.
(IPY00009701 = PTR 34019)
For Linux, the Continuous Speech Processing API for HMP Demo is located in:
$(INTEL_DIALOGIC_DIR)/demos/SpeechProcessing/CSPDemo/Release/
The demo is started by executing the following command:
./CSPDemo -<option>
3.5.3 IP Media Server for Host Media Processing Demo Guide
The IP Media Server for HMP Demo is designed to run using a series of four or fewer
contiguous channels. The highest channel number in the series must be 120 or lower.
Attempts to run the demo using a channel number higher than 120 will cause the demo to
fail.
(IPY00009701 = PTR 34019)
The following changes and corrections apply:
• The name of this document was originally titled IP Media Server (Global Call) Demo
Guide.
• In Section 3.1.1, “Configuration File Location”, of Chapter 3, “Preparing to Run
the Demo”, the location of the file for Linux should be:
$(INTEL_DIALOGIC_DIR)/demos/IPMediaServer/Release/
• In Section 3.2, “Compiling and Linking” of Chapter 3, “Preparing to Run the
Demo”, the path given in the example for compiling the entire project should be:
$(INTEL_DIALOGIC_DIR)/demos/IPMediaServer/
and the path given in the example for compiling an individual module should be:
$(INTEL_DIALOGIC_DIR)/demos/IPMediaServer/Modules/FaxModule