Filter
Top Products
ENGLISH - 9 -
Press or button to select the country where
you are now located.
After selecting the country, press
or button to store
the selected country.
Press MENU button to return to the INSTALL menu, or
Press STANDARD button to exit the menu.
Tuning Menu:
You can store a channel manually, or modify the current set-
tings of a channel (for example, changing the channel name).
In an AV mode, you can change only the MODE or CO-
LOUR SYSTEM setting.
If you want to modify the current settings of a channel, se-
lect the channel of which you want to modify the setting.
Then display the main menu on the screen.
Press or button to select TUNING item.
Press
or button to enter TUNING menu.
1. Press or to select an item in the TUNING
menu. Then press
or button to change the setting.
2. After all settings of a channel are completed, press
or
button to select Programme item. Then press
or button to select a programme number which you
want to store the setting.
3. Press or button to select Store item. Then
press
or button to store the setting.
The "STORED" appears at the bottom of the menu for 3
seconds. Then T-V LINK menu appears.
4. If you do not have a T-V LINK compatible VCR, press
STANDARD button to exit the menu.
If you have a T-V LINK compatible VCR connected to the
EXT-2 terminal, follow the operating procedure Down-
loading the data to VCR on page 6 to transmit the Pro-
gramme table data to the VCR.
Search:
You can search a channel manually.
Select "Search" item. Then press
or button to start
searching. "SEARCHING" is displayed while the TV is
searching a channel.
Searching stops when the TV finds a channel. Then the
channel is displayed.
Press
or button repeatedly until the channel you want
appears.
When you cannot search a channel you want, select the
"Standard" item and select other broadcasting system.
Then start searching again.
Standard:
If you cannot hear the normal sound even when the picture
appears normally, select the correct broadcasting system to
hear the sound normally.
Select "Standard" item. Then press
or button to se-
lect a broadcasting system.
Colour system:
If the picture is not clear or no colour appears, select the
correct colour system to display the picture normally.
Select "Colour system" item. Then press
or button
to select a colour system.
Band, Channel:
If you know a channel number, you can find it directly by
entering the channel number.
Select the "Band" item. Then press
or button to se-
lect the band (C or S) where the channel you want is lo-
cated.
Select the Channel item. Then press or button to
select the channel number, or enter the channel number
with the digit buttons. The available channel numbers differ
depending on your COUNTRY and Standard settings.
Fine tuning:
If the channel reception is poor, fine-tune the channel.
01-ENG-2834-AK52-1100UK-4-3-(AV-28RH4BU&SU).p65 27.04.2004, 10:479