Filter
Top Products
ENGLISH - 10 -
Select "Fine tuning" item. Then press or button to
fine -tune the channel.
Name:
You can store the channel name or change it.
Select Name item. Then press
or button to display
a cursor.
Press
or button to select a character and
press
or button to move the cursor.
After the name is completed, press the MENU button.
Mode:
Set "Mode" item to "TV" for the TV channels.
When you watch a picture from your VCR and the picture is
unstable, you may improve it by changing the "Mode" set-
ting from "TV" to "VCR".
Decoder (EXT-2):
You can only set Decoder (EXT-2) item to ON if you have
a decoder connected to a T-V LINK compatible VCR, which
in turn is connected to the EXT-2 terminal. To use this item,
please see the
Using the Decoder (EXT-2) function on the following sec-
tion.
Store:
After the all settings are completed, store the new channels
setting to the programme number which you selected.
Press or button to select Store, then press
or to store it.
Using the Decoder (EXT-2) function
If you have a decoder connected to a T-V LINK compatible
VCR, which in turn is connected to the EXT-2 terminal, use
DECODER (EXT-2) to unscramble the scrambled TV chan-
nels.
1. Exit the menu.
2. Turn on the decoder power.
3. Display the scrambled TV channel on the TV. Even if the
decoder is working, a scrambled picture appears.
4. Display the INSTALL. menu again.
5. Press
or button to select DECODER (EXT-2),
then press
or button to set to ON
6. Press or to select STORE, then press or
button to store it. T-V LINK menu will appear after the
TV stores the setting.
7. Follow the operating procedure Downloading the data
to VCR on page 6 to transmit the revised programme
table data to the VCR.
If you do not want to transmit, press STANDARD but-
ton to exit the menu.
Note:
You can only use this item if you have a decoder connected
to a T-V LINK compatible VCR to EXT-2 terminal. Setting this
item to ON by mistake causes the picture/sound of a TV
channel you are currently viewing to disappear.
If this item has been set to ON but the TV channel cannot
be unscrambled, check the following:
Has the decoder been connected to the VCR properly ac-
cording to the VCR and Decoder instruction manuals?
Can the TV channel be unscrambled with a decoder?
Do you need to change the VCR settings in order to con-
nect the decoder? Confirm that the VCR is set properly by
rechecking the VCR instruction manual.
Program Menu:
You can use the PROGRAM menu to change a programme
number, delete a channel.
Press
or button to select PROGRAM item.
Press
or button to enter the PROGRAM menu.
To choose a channel in the PROGRAM menu:
Press
/ / / button.
The colour of the programme number that you choose is
changed in the PROGRAM menu and you can view the pic-
ture of that channel.
Caution:
Using DELETE or CHANGE item rewrite the current chan-
nel list in the PROGRAM menu. Therefore, the programme
numbers of some of channels will change.
When you complete the settings of PROGRAM menu:
If you have a T-V LINK compatible VCR, press the
but-
ton to display the T-V LINK menu. Then follow the operating
procedure Downloading the data to VCR on page 6 to
transmit the Programme table data to the VCR.
01-ENG-2834-AK52-1100UK-4-3-(AV-28RH4BU&SU).p65 27.04.2004, 10:4710