Filter
Top Products
ENGLISH - 5 -
NOTE: If you have switched of the TV set from the power but-
ton instead of the remote control, next time you press the
power button, the TV set will switch on without going to the
stand-by mode.
Initial Settings
When the TV is first turned on. It enters the initial setting
mode, and the AUTOSTORE menu is displayed. Follow the
instructions below to do the initial settings.
The AUTOSTORE menu does not appear when your TV has
been turned on once. In this case, use the LANGUAGE,
COUNTRY and AUTOSTORE items in the INSTALL
menu to make the initial settings. For details, see Install
(Installation) Menu on page 8.
If you want to do the initial settings later, press STAN-
DARD button to turn the menu off.
1. Press "
" or " " button to select "LANGUAGE"
item. Then press the
or button to enter the "LAN-
GUAGE" sub-menu.
2. Press " " or " " button to select a language. Then
press the
or button to store it.
3. Press the MENU button to return to the AUTOSTORE
menu.
4. Press "
" or " " button to select "COUNTRY" item.
Then press the
or button to enter the "COUNTRY"
sub-menu.
5. Press " " or " " button to select the country where
you are now located. Then press the
or button to
store it.
6. Press the MENU button to return to the AUTOSTORE
menu.
7. Press
or button to select Continue item.
Then press
button to start the AUTOSTORE function.
The AUTOSTORE function automatically stores the re-
ceived channels in your TV's programme numbers.
APS: Automatic Programming System
After the AUTOSTORE is finalized, PROGRAM menu ap-
pears. You can delete a channel or change a programme
number. For details, see PROGRAM Menu on page 10.
8. If you do not have a T-V LINK compatible VCR, press
STANDARD button to exit the menu.
If you have a T-V LINK compatible VCR connected to the
EXT-2 terminal, press
button to display T-V LINK
menu. Then follow the operating procedure Downloading
data to VCR in the following T-V LINK section.
If a channel you want to view is not stored, store it using
the TUNING menu. For details, see Tuning Menu on
page 9.
T-V LINK
When a T-V LINK compatible VCR is connected to the EXT-2
Terminal on the TV, it is easier to set up the VCR and to view
videos. T-V LINK uses the following features:
To use T-V LINK functions:
A T-V LINK compatible VCR means a JVC video cassette
recorder with the T-V LINK logo, or with one of the following
logos. However, these VCRs may support some or all of the
features described earlier. For details, see your VCR instruc-
tion manual.
Q-LINK (a trademark of Panasonic Corporation)
Data Logic (a trademark of Metz Corporation)
01-ENG-2834-AK52-1100UK-4-3-(AV-28RH4BU&SU).p65 27.04.2004, 10:465