Filter
Top Products
ENGLISH - 11 -
If you do not have a T-V LINK compatible VCR, press STAN-
DARD button to exit the menu.
To change a programme number (CHANGE):
1. Select a channel that you want to change its programme
number.
2. Press Blue button to enter the CHANGE mode.
3. Press
/ / / button to select the pro-
gramme number that you want to change the programme
number of the selected channel to.
4. Press Blue button. Two channels of the selected program-
me numbers will be exchanged.
To delete a channel (DELETE):
1. Select a channel that you want to delete.
2. Press Red button to delete it.
Autostore Menu:
The AUTOSTORE function automatically programmes the re-
ceived channels in your TV's programme numbers.
Before use this function, please confirm that the LAN-
GUAGE and COUNTRY setting are correct.
1. Press
or button to select AUTOSTORE
item.
2. Press
or button to enter the AUTOSTORE menu.
A warning message All prestored programmes will be
erased! appears in a message box.
3. Press
button to start the AUTOSTORE function.
To cancel the AUTOSTORE function, press the STAN-
DARD button.
4. After the AUTOSTORE is finalized, the PROGRAM menu
appears.
Please see Program Menu on above section.
Feature Menu
Press MENU button, now you are in main menu. In the
main menu, select FEATURE, using
or button.
Then enter the feature menu pressing
or button.
Sleep timer:
The sleep timer is used to turn the TV off after a defined peri-
od. Press
or button to choose a priod of time after se-
lecting this item. The timer can be programmed between Off
and 120 minutes in steps of 10 minutes. One minute before
the "Sleep timer" function turns the TV off, the remaining
time will be displayed.
Child lock:
You can disable the control panel buttons (except the POW-
ER button) with this item.
Press
or button to change the setting to ON or OFF
after selecting this item.
When you set this item to ON, the TV can be operated only
by using the remote control handset.
Warning: If Child Lock item is set to ON, the TV can not be
operated by VCR.
Setting External Source Output:
You can use this menu to select the internal or external
source that will be output at EXT.2 (EXT-2) terminal.
In the FEATURE menu select EXT-2 Output using
or
button. Then select the source you want to be out-
put at EXT-2 pressing
or button (one of the sources:
TV, EXT-1 or EXT-3 (Front AV).
01-ENG-2834-AK52-1100UK-4-3-(AV-28RH4BU&SU).p65 27.04.2004, 10:4711