Filter
Top Products
Additional preparation
39
AV-32/28R57SK / LCT1793-001A-U / ENGLISH
Equipment which can output the
S-VIDEO signal (Y/C signal) such
as an S-VHS VCR
Connect the equipment to an EXT terminal
(but not the EXT-1 terminal).
You can choose between an S-VIDEO signal
(Y/C signal) and a regular video signal
(composite signal). For details of how to
operate the equipment, see “S-IN (S-VIDEO
input)” on page 35.
T-V LINK compatible VCR
Be sure to connect the T-V LINK compatible
VCR to the EXT-2 terminal. If not, the T-V
LINK function will not work properly.
• When connecting a T-V LINK compatible
VCR to the EXT-2 terminal, be sure to
connect the decoder to the VCR. If not,
the T-V LINK function may not work
properly. After you have stored TV
channels in the programme numbers (PR)
list, set the DECODER (EXT-2) function
for the programme number (PR) to ON to
unscramble a scrambled TV channel. For
details, see “EXT SETTING” on page 35.
Connecting headphones
Connect the headphones with a stereo mini-
jack (3.5 mm diameter) to the headphone
socket at the TV rear panel.
• No sound comes from the TV speakers
when the headphones are connected.
Video or sound signal output from
the EXT-2 terminal
You can change over the output of the video/
sound signal from the EXT-2 terminal. This
is useful when you want to dub the video/
sound from another device onto the VCR
connected to the EXT-2 terminal. For details
on how to do this, see “DUBBING” on
page 36.
TV output from the EXT-1 terminal
The video/sound signal of a TV channel you
are viewing is always output from the EXT-1
terminal.
• Changing over a programme number (PR)
also changes over the TV output from the
EXT-1 terminal.
• The video/sound signal from an EXT
terminal cannot be output.
• Teletext programmes cannot be output.
Listening to Dolby Digital
audio
In order to listen to Dolby Digital audio
which is recorded as a Dolby Digital
programme source (such as a DVD-video
disc), connect the device and set the
DIGITAL-IN as described below.
Preparation:
• A device (such as DVD player) with a
digital output terminal (optical) for Dolby
Digital is necessary.
• A coaxial cable or optical cable is
necessary to make the connections. (Not
supplied with the TV)
• In accordance with the instruction manual
which is supplied with the device,
correctly connect a coaxial cable or
optical cable to the device’s DIGITAL
OUT (digital output) terminal and set the
device so that the Dolby Digital audio
signal is output.
• Correctly connect the device to the EXT
terminal in accordance with “Connecting
external equipment” on page 38.
However, since the EXT-4 terminal does
not work with Dolby Digital audio, it
cannot be used.
AV-32&28R57SK_Eng.book Page 39 Wednesday, March 30, 2005 2:58 PM