Filter
Top Products
E-25
z “B” display:Messages for incorrect operation are displayed for about 3 seconds.
They are displayed when the DISPLAY mode is ON or AUTO.
Display Description
INVALID TAPE! Data tape for PCs or DVC PRO tape is used.
The cassette tape will be automatically ejected.
LP TAPE! The user attempted to play back a tape recorded in the LP mode.
BR-HD50 cannot record or play in the LP mode.
NO HDV/DV SIG-
NAL
The user attempted to record without HDV or DV signal input.
COPY INHIBIT The user attempted to record copy-guarded signals.
REC INHIBIT The user attempted to record on a tape that is not ready for recording (the rear
switch is set to SAVE).
OPERATION
LOCK
This message is displayed when an operation button is pressed with OPERA-
TION LOCK enabled. To enable OPERATION LOCK, set OPERATION LOCK in
the SYSTEM [2/2] Menu screen to ON.
PB INHIBIT
[60/50]
This message is displayed when the HD/SD signal format setting differs during
playback of a tape recorded in HDV/DV format.
REC INHIBIT
[60/50]
• (for U model)
This message is displayed when the unit is recorded in PAL mode.
• (for E model)
This message is displayed when the unit is recorded in NTSC mode.
50/25 INHIBIT • When 60/50 SEL in the SYSTEM [2/2] Menu screen is set to 60, this message
is displayed when HDV signal format is not 60Hz.
• This message is displayed when the DV signal from the IEEE1394 terminal is
not NTSC.
60/30 INHIBIT • When 60/50 SEL in the SYSTEM [2/2] Menu screen is set to 50, this message
is displayed when HDV signal format is not 50Hz.
• This message is displayed when the DV signal from the IEEE1394 terminal is
not PAL.