Filter
Top Products
E-42
RECORDING
Settings for digital signal input
Selecting digital input signal
Set the INPUT SELECT switch located on
the front panel to HDV/DV.
Inputs IEEE1394 terminal HDV or DV digital
video.
For audio, digital audio is input from the
IEEE1394 terminal.
Settings for digital video format
Set according to whether the IEEE1394 termi-
nal input video format is HDV or DV.
Set the IEEE1394 switch on the front panel,
according to the video format of the input
signal.
HDV : To input HDV format signals, set to
this position. The HDV indicator on
the front panel will light.
DV : To input DV format signals, set to
this position. The HDV indicator on
the front panel will turn off.
Memo
z During digital signal input, make sure the
IEEE1394 switch setting matches the input
signal video format. When the switch setting
does not match the video format, no recording
operation is available.
z During HDV signal input, match the HD signal
format (60Hz or 50Hz) to the input signal for-
mat.
(XPage 40 “Selecting HD signal format”)
z Recording/output signal format during HDV or
DV signal input: XPage 33
Selecting input signal
IEEE1394 switch
INPUT SELECT switch
HDV indicator light