Filter
Top Products
E-36
PREPARATION
Operation method (main unit/remote controller) and OPERATION LOCK mode
Whether to operate BR-HD50 with its buttons or the remote con-
troller can be selected with the REMOTE/LOCAL switch.
Setting the REMOTE/LOCAL switch
• To operate with the buttons of BR-HD50, set it to “LOCAL”.
• To operate BR-HD50 with RS-422A editing remote controller
that is connected to the REMOTE terminal, set it to
“REMOTE”.
Memo
With the REMOTE/LOCAL switch set to REMOTE, RS-422A can
be enabled using REMOTE SEL 9P in the REMOTE [1/2] Menu
screen.
• The setting position of the REMOTE switch for operating BR-
HD50 with the SERIAL REMOTE terminal can be selected
using REMOTE SEL SER in the REMOTE [1/2] Menu
screen.
• The setting position of the REMOTE switch for operating BR-
HD50 with the IEEE1394 terminal can be selected at REM
SEL HDV/DV in the REMOTE [1/2] Menu screen.
[XPage 70 “REMOTE [1/2] Menu screen”]
BR-HD50 comes with an operation lock function to prevent unauthorized or incorrect operation.
In the OPERATION LOCK mode, the operation buttons and slide switches of BR-HD50 are disabled.
However, the OPERATE ON and MENU operations are effective.
The PHONES volume is always effective.
Turning on the OPERATION LOCK mode
Set OPERATION LOCK in the SYSTEM [2/2] Menu screen to
ON.
• If the operation button of BR-HD50 is pressed while BR-
HD50 is in the OPERATION LOCK mode, “OPERATION
LOCK” is displayed on the monitor for about 3 seconds.
Turning off the OPERATION LOCK mode
Set OPERATION LOCK in the SYSTEM [2/2] Menu screen to
OFF.
Selecting the operating method (main unit/remote controller)
OPERATION LOCK mode
–––
REMOTE[1/2]
–––
REMOTE SEL 9P ON
REMOTE SEL SER ON
REM SEL HDV/DV ON
LOCAL FU
N
CTION STP+EJT
PREROLL 7SEC
NEXT PAGE
PAGE BAC
K
REMOTE [1/2] Menu screen
Memo
If the REMOTE/LOCAL switch
is set to REMOTE, the buttons
that can be operated by the
main unit can be selected with
LOCAL FUNCTION.
REMOTE/LOCAL switch
–––SYSTEM[2/2]––––––
DC IN MODE OPE OFF
INDEX WRITE INDEX
OPERATION LOCK ON
60/50 SEL 60
FACTORY SETTING CANCEL
DRUM HOUR METER 000000
PAGE BAC
K
SYSTEM [2/2] Menu screen