JVC DR-MV7SU DVD VCR Combo User Manual


 
20
General Settings
General Settings
Tuning Band Select
1. Select the [Tuning Band] option then press B .
2. Use v / V to select the tuning band (TV or
CATV) option then press ENTER.
TV: If you are using a standard antenna to receive
channels.
CATV: If you are using basic cable to receive
channels.
Auto Channel Set
Connect the Recorder to the desired type of antenna
or cable TV system as shown on page 13.
This Recorder is equipped with a frequency synthe-
sized tuner capable of receiving up to 181 channels.
These include VHF channels 2-13, UHF channels 14-
69 and CATV channels 1-125.
1. Select the [Auto Channel Set] option.
2. Press B to move to the third level.
[Start] icon is highlighted.
3. Press ENTER to begin the channel search.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
Note:
After the Auto Channel Set proceeding is complete,
make sure the Tuning Band is set appropriately (TV
or CATV) on tuning band, follow steps 1~2 as shown
previous (Tuning Band Select) to choose the correct
Tuning Band (TV or CATV).
To Add or Erase Channels
This feature allows you to add to or erase channels
from memory manually.
1. Select the [CH. Add/Del] option.
2. Press B to move to the third level.
[Edit] icon is highlighted.
3. Press ENTER and the Channel Edit menu
appears.
4. Use v / V or number buttons to select a channel
then press B.
5. If you want to obtain a clearer picture, tune the
[MFT] option using v / V then press B.
[Add] or [Delete] icon is highlighted.
6. Press ENTER to confirm your setting.
7. Repeat steps 4-6 to add or erase additional
channels.
8. Press HOME or RETURN (O) to exit the menu.
Clock Set
Auto
In the Auto option, the Recorder looks for a chan-
nel carrying XDS (Extended Data Services) infor-
mation. XDS updates the clock using the
Coordinated Universal Time.
1. Select the [Clock Set] > [Auto] option.
2. Press ENTER.
3. Use v / V to choose your Time Zone
manually. When Timezone is set to Auto,
the Recorder will use XDS information to
determine the proper setting.
4. Use B to choose the [Daylight Savings]
option.
Use v / V to choose Auto, ON, or OFF.
When it is set to Auto, the Recorder will use
XDS information to determine the proper set-
ting.
5. Press ENTER to confirm your setting.
6. Press HOME to exit the Setup menu.
Notes :
The Auto Clock Feature enables the Recorder
to set up the clock when the Recorder is
turned off.
The “Auto Clock” function may not be operat-
ed properly. This is a performance of the unit,
not a malfunction.