JVC DR-MV7SU DVD VCR Combo User Manual


 
37
RECORDING
T
T
imer Recording
imer Recording
The Timer Recording function allows you to record up
to 16 programs within a period of one month.
1. Press HOME and the Home menu appears.
2. Select [TV] > [Timer Record] and press ENTER.
3. Select [NEW] and press ENTER.
The Timer Record menu will appear.
[Media] – Choose a media (DVD or VCR).
[Ch.] – Choose a channel (2-69 or 1-125 for
antenna or cable channels respectively,
excluding skip channels), or one of the exter-
nal inputs from which to record (AV1 or AV2).
[Date] – Choose a date up to 1 month in
advance, or select a daily or weekly program.
[Start Time] – Set the recording start time.
[End Time] – Set the recording end time.
[Mode] – Choose a record mode.
DVD: EP, LP, SP, XP, or AT (Auto)
VCR: SP, SLP, or AT (Auto)
AT(Auto) mode determines how much time is avail-
able on the disc or tape and switches record mode,
if necessary, to complete recording the program.
2. Enter the necessary information for your timer
recording(s).
b / B (left/right) – Move the cursor left/right.
v / V (up/down) – Change the setting at the
current cursor position.
Press RETURN (O) to exit the Timer Record
menu.
3. Press ENTER to save the program.
4. Press RETURN (O) to exit the Timer Record
List.
5. Press STANDBY/ON (1/`) to turn off the unit.
Notes:
•You must insert a recordable disc or tape.
The Timer indicator lights on the front panel
display.
The Recorder will record the audio according to
the current TV tuner setting (Stereo, Mono or
SAP). Use the AUDIO button to set the audio
before switching the Recorder to Standby mode.
The Recorder will automatically power off when
the Timer Recording ends.
If the unit is DVD mode when the VCR timer
recording ends, the unit will not automatically
power off.
•You must press STOP (x) to stop the Timer
Recording.
•You cannot use the Timer Programming during
the DVD or VCR recording.
Displays “Duplicate Date” when the Programming
time is overlapped.
Displays “Duplicate Date” when the end time of
any timer program and the start time of next pro-
gram are the same. The very beginning portion of
the later program may not be recorded. To avoid
this set the end time 1 minute earlier.
The caution message will appears on the TV
screen 1 minute before Timer Recording starts
while dubbing. Press STOP within 5 seconds to
cancel the Timer Recording, otherwise the unit will
start the Timer Recording.
Checking Timer Recording Details
Programming can be checked whenever the
Recorder is turned on.
1. Press HOME and the Home menu appears.
2. Select [TV] > [Timer Record] and press ENTER.
3. Use v / V to select a program.
4. Press ENTER to edit the selected program.
Timer Record menu appears.
Canceling a Timer Recording
You can clear a timer setting anytime before the
recording actually starts.
Use v / V to select a program you want to erase
on the Timer Recorder List menu, then press
CLEAR and select [OK] than press ENTER.