JVC HR-DD858EH VCR User Manual


 
28 EN
Express Timer
Programming
TIMER RECORDING (cont.)
If you don’t know the SHOWVIEW number for the programme you
wish to record, use the following procedure to set your recorder
to timer-record the programme.
ACCESS SHOWVIEW
SCREEN
1
Press PROG.
ACCESS PROGRAMME
SCREEN
2
Press START +/–. (If you’re
just starting out, “P1”
appears.)
The front display panel looks like this:
ENTER PROGRAMME
START TIME
3
Press START +/– to enter
the time you want
recording to start.
Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
The front display panel looks like this:
ENTER PROGRAMME STOP
TIME
4
Press STOP +/– to enter the time you want recording to
stop.
Press and hold STOP +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
ENTER PROGRAMME DATE
5
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
SP
SP
Before performing Express Timer Programming:
Make sure that the recorder's built-in clock is set
properly.
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the VIDEO channel (or AV mode).
– –:– –
123
456
7
89
0
2
4
1
3
OK
WEEKLY
DAILY
START+/–
PROG
STOP+/–
TV PROG+/–
DATE+/–
VPS/PDC
SP/LP
– P1 –
START STOP
– –:– – = – –:– –
SP VPS/PDC OFF
DATE TV PROG
– –.– – – –
[+/–] =
[PROG] : EXIT
– P1 –
START STOP
21:00 = – –:– –
SP VPS/PDC OFF
DATE TV PROG
– –.– – – –
[+/–] =
[PROG] : EXIT