Filter
Top Products
EN 37
Another recorder
RF Cable
(provided)
Another recorder
Recorder
21-pin SCART Cable
(not provided)
Player Your recorder Recorder Your recorderTV Receiver TV Receiver
RF Cable
(provided)
21-pin SCART Cable
(not provided)
Player
VIDEO
CHAN-
NEL or
AV mode
VIDEO
CHAN-
NEL or
AV
mode
AV2 SELECT Setting
1 Press MENU to access the Main Menu screen.
2 Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or .
3Press %fi to move the highlight bar (pointer) to "AV2 SELECT".
4 Press OK or to select "AV2" or "DECODER".
a–AV2 : To use this recorder as the recording deck with the player connected to the
AV2 IN/DECODER connector.
OR
To record a satellite programme through a satellite tuner connected to the
AV2 IN/DECODER connector.
b–DECODER : To use a decoder connected to the AV2 IN/DECODER connector.
5 Press MENU to return to normal screen.
● If you have a decoder, be sure to set "AV2 SELECT" back to "DECODER" after editing.
● If you're not using a decoder, leave "AV2 SELECT" set to "AV2".
● The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut or because the AC was removed
from the recorder, "AV2" will be automatically selected when the power is restored to the recorder. If you are using a decoder,
be sure to set "AV2 SELECT" back to "DECODER".
NOTE:
On the Mode Set screen ...
"POWER SAVE" appears only with the HR-J758E and HR-DD858E.
fi
fi
MODE SET
AUTO TIMER OFF
O. S. D. ON
B. E. S. T. ON
AUTO SP=LP TIMER ON
POWER SAVE OFF
AV2 SELECT AV2