Filter
Top Products
34 EN
SPECIAL FEATURES (cont.)
Control Your TV Using
Additional Buttons
Use the NUMBER keys, and the button, button or ‰
button to select the TV’s channel.
● With televisions under Code 01, 02, 03, 04, 05, 06, 07,
09, 10, 13, 14, 22, 23 or 25, the button corresponds
to the 1-digit/2-digit entry switching button (often labelled
– /– –) of your TV’s remote control.
● With televisions under Code 01, 11 or 12, the button
corresponds to the 10 + button, and the ‰ button corre-
sponds to the 20 + button of your TV’s remote control.
NOTE:
The way these buttons are used is determined by your TV.
Use these buttons as instructed for your TV’s remote control.
SET TV BRAND CODE
1
Refer to the chart below. While holding down TV on
the recorder's remote control, enter your TV’s brand
code using the NUMBER keys, then press STOP.
Check if the TV's power goes off as it should. If it does,
try other operations (੬ step 2)
● Once you have set the remote control to operate the
TV, you don't have to repeat this step until you
replace your remote control's battteries.
● JVC or SAMSUNG has more than one code. If the TV
does not function with one code, try entering another.
OPERATE TV
2
First, press TV to set the remote control to TV mode, then
press the corresponding button: , TV PROG +/–,
TV/VCR, TV +/– (Volume), (Muting), NUMBER
keys.
● For some brands of TV, you must press OK after
having pressed the NUMBER keys.
IMPORTANT
Although the provided remote control unit is compatible with
JVC televisions, as well as many other models, it may not work
with your TV, or in some instances, may have limited function
capability.
TV BRAND NAME CODE
JVC 01, 02, 03, 04
BRANDT 05
NORDMENDE 05
SABA 05
TELEAVIA 05
TELEFUNKEN 05
THOMSON 05
FERGUSON 06
PHILIPS 07
SAMSUNG 07, 19, 23, 24, 25
BLAUPUNKT 08
GRUNDIG 08
SONY 09
PANASONIC 10
GRAETZ 11
ITT 11
LUXOR 11
SALORA 11
SELECO 11
MIVAR 12
HITACHI 13
TOSHIBA 14
MITSUBISHI 15
FINLUX 16
NOKIA 17
SHARP 18
FUNAI 20
GOLDSTAR 21
NEC 22
TV Multi-brand Remote
Control
Your remote control can operate the basic functions of your TV set.
In addition to JVC TVs, other manufacturer’s TVs can also be
controlled.
Before you start . . .
● Turn on the TV using its remote control.
– –:– –
123
456
7
89
0
2
4
1
3
TV
VCR
NUMBER
OK
STOP
TV PROG+/–
TV/VCR
TV
+/–
ATTENTION
The remote control can operate not only the video recorder
but also some of your TV and satellite tuner's functions.
● To operate your video recorder, first press the VCR button
to set the remote control to the Video mode.
● To operate your TV, first press the TV button to set the
remote control to the TV mode.
● To operate your satellite tuner, first press the SAT button to
set the remote control to the Satellite tuner mode.
SAT