Filter
Top Products
48 EN
– –:– –
123
456
7
89
0
2
4
1
3
SUBSIDIARY SETTINGS (cont.)
ATTENTION
After you have stored channels manually, be sure to
perform Guide Program Number Set (੬ pg. 53) in order to
get proper results from SHOWVIEW timer recording.
NUMBER
Storing Channels Manually
Store channels that were not stored during Auto Set Up (੬ pg. 4)
or Auto Channel Set (੬ pg. 46).
SELECT BAND
4
Press %
fi
to change the
band between CH (regular)
and CC (cable), then
press .
INPUT CHANNEL
5
Press the NUMBER keys to input the channel number you
want to store.
● Input "0" before any single number entries.
● To input the registered station name (ID – ੬ pg. 51),
press until "----" (ID setting) begins blinking, then
press
%
fi.
● For fine tuning adjustment, press until "+/–" begins
blinking, then press
%
fi. While tuning, “+” or “–”
appears.
● When storing a channel that sends scrambled
broadcasts, press until "OFF" (Decoder setting)
blinks, then press %fi to set "DECODER" to "ON"
("OFF" is the default setting).
● When "AV2 SELECT" is set to "AV2", the "DECODER"
setting cannot be changed (੬ pg. 37).
ENTER NEW CHANNEL
INFORMATION
6
Press OK and the Confirmation screen appears.
● Repeat steps 3 through 6 as necessary.
CLOSE CONFIRMATION
SCREEN
7
Press MENU.
● To change positions, see "Change Station Channel
Position" (੬ pg. 49).
● If you wish to set station names other than the ones
registered in your recorder, ੬ "Set Stations (B)" on
page 50.
%
%
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
ACCESS MAIN MENU
1
Press MENU.
ACCESS CONFIRMATION
SCREEN
2
Press %fi to move the highlight bar (pointer) to
“MANUAL CH SET”, then press OK or . The Confir-
mation screen appears.
SELECT POSITION
3
Press %
fi
until an
open position in which
you want to store a
channel begins blinking,
then press OK. The
Manual Channel Set
screen appears.
%
(Ex.) To store in position 12.
%
%
%
%
∞
∞
PR CH ID PR CH ID
01 25 ARD 08 C26 E-SP
02 CDB SKY1 09 55 WEST
03 10 ZDF 10 C24 SAT1
04 C65 RAI1 11 C23 OSF
05 C31 BBC1 12
– –␣ – –
06 C32 BBC2 13
– –␣ – –
07 C33 3SAT 14
– –␣ – –
[5
∞
]
=
: EDIT
= [X] : DELETE
[MENU] : EXIT
PR CH ID FINE DECODER
12 CH01
– –␣ – –
+/– OFF
[
5
∞
] : SELECT
[
] : CURSOR +=
: OK
[MENU] : EXIT
∞
∞
OK
MENU