Filter
Top Products
EN 23
SET TAPE SPEED (HR-J459EE ONLY)
4
Press SP/LP ( ) to set the tape speed.
SET VPS MODE
5
Press VPS (NUMBER key "7") to select "ON" or "OFF".
If "VPS/PDC OFF" is displayed on the screen or "VPS/
PDC" is lit on the display panel, VPS is set to OFF.
If "VPS/PDC ON" is displayed on the screen or "VPS/PDC"
is not lit on the display panel, VPS is set to ON.
੬ "VPS Recording" on page 25.
● PDC (Programme Delivery Control) recording is not
possible with this recorder.
RETURN TO NORMAL SCREEN
6
Press PROG. or OK. "PROGRAM COMPLETED"
appears on the screen for about 5 seconds, then normal
screen appears.
● Repeat steps 1 – 6 for each additional programme.
ENGAGE RECORDER’S TIMER MODE
7
Press TIMER. The recorder turns off automatically and
‰ appears on the display panel.
● To disengage the timer, press TIMER again.
NOTES:
●
To Change The Stop Time . . .
. . . press STOP +/– after pressing OK in step 3. You can
compensate for anticipated programme schedule delays this
way.
●
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
“9”) for weekly serials or DAILY (NUMBER key “8”) for daily
serials (Monday – Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.
●
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen and "FULL"
appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes (
੬
pg. 26).
●
It is not possible to timer-record a TV programme with a
S
HOW
V
IEW
number which starts with "0".
ATTENTION
Regarding Guide Program Number Set
"GUIDE PROG SET" appears after performing step 3 if the
Guide Program number for the SHOWVIEW number you
entered has not been set.
● Press the NUMBER keys or PUSH JOG %fi to input the
channel position number on which your recorder
receives that station, then press OK or PUSH JOG .
The SHOWVIEW program screen appears.
GUIDE PROG SET
GUIDE PROG TV PROG
2 – –
[
5
∞] =
[PROG] : EXIT
(Ex.) To timer-record a RTR
programme with SHOWVIEW.
* If your recorder receives
RTR on the channel position
2, press OK or PUSH JOG
after entering "2".
Satellite Tuner Users
To timer-record a satellite broadcast using SHOWVIEW:
1 Perform steps 1 – 7.
2 Set the satellite tuner to the appropriate channel before
the selected programme begins.
3 Leave the satellite tuner's power on.
%
%
123
456
7
89
0
2
4
1
3
WEEKLY
DAILY
OK
STOP+/–
TIMER
PROG.
SP/LP
VPS
PUSH JOG
NUMBER