Filter
Top Products
34 EN
123
456
7
89
0
2
4
1
3
TUNER SET (cont.)
MENU
PUSH JOG
OK
Storing Channels Manually
Store channels that were not stored during Auto Set Up (੬ pg. 6)
or Auto Channel Set (੬ pg. 32).
SELECT BAND
4
Press PUSH JOG %fi to
change the band between
CH (regular) and CC
(cable), then press PUSH
JOG .
INPUT CHANNEL
5
Press the NUMBER keys to input the channel number you
want to store.
● Input "0" before any single number entries.
● To input the registered station name (ID – ੬ pg. 38),
press PUSH JOG until "– – – –" (ID setting) begins
blinking, then press PUSH JOG
%fi
.
● For fine tuning adjustment, press PUSH JOG until
"+/–" begins blinking, then press PUSH JOG
%
fi.
While tuning, “+” or “–” appears.
● To select the appropriate TV system, press PUSH JOG
until TV system setting (B/G or D/K) blinks, then
press PUSH JOG %fi. Refer to the table below.
ENTER NEW CHANNEL
INFORMATION
6
Press OK and the Channel List screen appears.
● Repeat steps 3 through 6 as necessary.
CLOSE CHANNEL LIST
SCREEN
7
Press MENU.
● To change positions, see "Change Station Channel
Position" (੬ pg. 35).
● If you wish to set station names other than the ones
registered in your recorder, ੬ "Set Stations (B)" on
page 37.
%
PR CH ID PR CH ID
01 25
– – – –
07 C33
– – – –
02 CDB
– – – –
08 C26
– – – –
03 10
– – – –
09 55
– – – –
04 C65
– – – –
10 C24
– – – –
05 C31
– – – –
11 C23
– – – –
06 C32
– – – –
12
– – – –
[5
∞
]
=
: EDIT
= [CANCEL] : DELETE
[MENU] : EXIT
TV
PR CH ID FINE SYSTEM
12 CH01
– –␣ – –
+/– D/K
[
5
∞
] : SELECT
[
] : CURSOR +=
: OK
[MENU] : EXIT
∞
∞
%
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
ACCESS MAIN MENU
1
Press MENU.
ACCESS CHANNEL LIST
SCREEN
2
Press PUSH JOG %fi to place the pointer next to
“MANUAL CH SET”, then press OK or PUSH JOG .
The Channel List screen appears.
SELECT POSITION
3
Press PUSH JOG %fi
until an open position in
which you want to store a
channel begins blinking,
then press OK. The
Manual Channel Set
screen appears.
%
(Ex.) To store in position 12.
%
%
Major Countries TV System
Austria, Denmark, Finland, Holland,
Italy, Norway, Spain, Switzerland, B/G
Sweden, Germany, Egypt
China, Mongolia, Rumania, Bulgaria,
Czech Rep., Slovakia, Hungary, Poland, D/K
Russia
NUMBER
CANCEL