JVC HR-J746MS VCR User Manual


 
24
SHOWVIEW
Setup
With SHOWVIEW, timer programming is greatly simplified
because each TV programme has a corresponding code number
which your recorder is able to recognise.
NOTE:
“Guide Channel” (GUIDE CH) refers to the assigned TV station
numbers, according to broadcast area, for S
HOW
V
IEW
timer
recording.
IMPORTANT
Perform the following procedure after Auto Set Up on page 14
and/or the channel setting steps on pages 16 and 18 – 20, and
after the Clock Set procedure on page 22.
After setting the Guide Channels, the station names and preset
positions may be incorrect if you stored or skipped channels. In
this case, re-perform Guide Channel setting.
Turn on the TV and select the AV mode.
INITIAL SETTINGS (cont.)
12
45
3
6
8
0
7
9
2
4
1
3
ANNUL.
OK
NUMBER
MULTI-FONCTIONS
MAKE LIST OF STORED
STATION NAMES AND
PRESET POSITIONS
1
(Ex.)
ACCESS MENU PRINCIPAL
SCREEN
2
Press MENU twice.
ACCESS REGL.DES
NUMEROS GUIDE SCREEN
3
Press MULTI-FONCTIONS %
to move the highlight
bar (pointer) to "REGL.DES NUMEROS GUIDE", then
press OK.
The Reglage des numéros guide screen appears.
Preset position Station name
1 TF1
2 FR2
3 FR3
4 Canal+
MENU PRINCIPAL
AUTRES REGLAGES
REGL. AUTO. DES CANAUX
REGL. MANUEL CANAUX
REGL. DES NUMEROS GUIDE
REGLAGE DE L'HORLOGE
[5
] =
[MENU] : SORTIE
5
NUMERO GUIDE CHAINE
REGL. DES NUMEROS
GUIDE 1 1
: SHOWVIEW/[5
] : ?
[ ] : REGLAGE MANUEL
[MENU] : SORTIE
Perform the following steps to check if the Guide Channels have
been correctly set during Auto Set Up, and make corrections if
necessary.
Guide Channel Set
MENU