JVC HR-J746MS VCR User Manual


 
34
PLAYBACK (cont.)
Spatializer
(HR-J746MS only)
Soundtrack Selection (HR-J746MS Only)
Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing CONTROLE AUDIO on the remote control changes the soundtrack being played back as follows:
TRACK
Recorder's Front Panel On-Screen Display
USE
L + R
HI FI
For Hi-Fi stereo tapes
LR
L
HI FI
For main audio of Bilingual tapes
L
R
HI FI
For sub audio of Bilingual tapes
R
NORM NORM For audio-dubbed tapes
L + R + NORM
HI FI
For audio-dubbed tapes
NORM
NOTES:
"L + R" should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the NORM track is played back
automatically for tapes with only normal audio.
For instructions on recording stereo and bilingual programmes, refer to page 40.
"O.S.D." must be set to "M." or the on-screen displays will not appear (
pg. 38).
This feature expands sound field when you play back any stereo
source or view a stereo programme while recording it.
*Spatializer has no effect on recording quality.
ACTIVATE SPATIALIZER
1
Press SPATIALIZER; the current setting will be displayed
on the screen for about 5 seconds. Pressing
SPATIALIZER while the screen shows the display
changes the setting.
To view a stereo programme such as movies or
music, select "SPATIALIZER " to create more
spacious sound.
To view a monaural programme, select
"SPATIALIZER[ST" which simulates a stereo effect.
Select "SPATIALIZER A." to turn off Spatializer if the
sound becomes unnatural with either "SPATIALIZER
" or "SPATIALIZER[ST" selected.
The SPATIALIZER button lights when either
"SPATIALIZER " or "SPATIALIZER[ST" is
selected, even though the recorder power is off.
The setting will remain effective even though you
turn on/off the recorder.
NOTE:
Spatializer is effective only with a stereo TV.
q
SPATIALIZER
12
45
3
6
8
0
7
9
2
4
CONTROLE AUDIO