JVC HR-J746MS VCR User Manual


 
44
Regular Timer
Programming
If you don’t know the PlusCode number for the programme you
wish to record, use the following procedure to set your recorder
to timer-record the programme.
TIMER RECORDING(cont.)
Remember, the clock must be set before you can progamme
the timer ( pg. 22).
Before performing the following steps:
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the AV mode.
ACCESS TIMER
PROGRAMMING SCREEN
1
Press PROG.
ACCESS PROGRAMME
SCREEN
2
Press DEBUT +/–. (If
you’re just starting out,
“Program 1” appears.)
The front display panel looks like this:
ENTER PROGRAMME
START TIME
3
Press DEBUT +/– to enter
the time you want
recording to start.
Press and hold DEBUT
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
The front display panel looks like this:
ENTER PROGRAMME STOP
TIME
4
Press FIN +/– to enter the time you want recording to
stop.
ENTER PROGRAMME DATE
5
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
q
12
45
3
6
8
0
7
9
2
4
1
3
DEBUT +/–
FIN +/–
– P1 –
DEBUT FIN
–:– – = –:– –
VN M.
DATE CHAINE
25.12 – –
[+/–] =
[MENU] : SORTIE
VN
– P1 –
DEBUT FIN
21:00 = –:– –
VN M.
DATE CHAINE
25.12 – –
[+/–] =
[MENU] : SORTIE
VN
DATE +/–
PROG.