JVC HR-J746MS VCR User Manual


 
42
SHOWVIEW Timer
Recording
TIMER RECORDING
Before performing SHOWVIEW Timer Recording:
Be sure to read "SHOWVIEW Setup" ( pg. 24).
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the AV mode.
q
12
45
3
6
8
0
7
9
2
4
1
3
ANNUL.
NUMBER
:PDC
PROGRAMMATION MINUTERIE
[0 – 9] : SHOWVIEW
[+/–] : PROG. EXPRESS
[MENU] : MENU PRINCIPAL
ACCESS TIMER
PROGRAMMING SCREEN
1
Press PROG.
The front display panel looks like this:
ENTER SHOWVIEW
NUMBER
2
Press the NUMBER keys to
enter the SHOWVIEW
number of a programme
you wish to record.
If you make a mistake,
press ANNUL. to
backspace and then
input the correct number.
The SHOWVIEW number
you enter appears on the front display panel:
The display panel can show only a 4-digit number. When
you enter the 5th digit, it replaces the previous 4-digits.
ACCESS SHOWVIEW
PROGRAM SCREEN
3
Press OK, and the SHOWVIEW
Program screen appears (if
you’re just starting out,
“Program 1” appears).
If the number you
entered is invalid,
“ERREUR” appears on
screen and "Err" appears
on the display panel.
Press ANNUL. to backspace and input a valid
SHOWVIEW number.
"ERREUR= NUMERO GUIDE" appears if the Guide
Channel for the SHOWVIEW number you entered has
not been set. If the recorder is in the stop or rewind or
fast-forward mode, the "REGL.DES NUMEROS
GUIDE" screen will appear automatically. Set the
Guide Channel correctly first ( pg. 24, "SHOWVIEW
Setup"), then perform steps 13 again.
The display panel shows the programme start time.
Pressing CONTROLE PROG. changes the display to the
programme stop time, then the date and channel.
If you’re not receiving PDC (Programme Delivery
Control), press
: PDC (NUMBER key “7”) to set to
"A." ( pg. 47).
OK
CONTROLE PROG.
SHOWVIEW
12345678
[0 – 9] =
[ANNUL.] : ANNULER
[MENU] : SORTIE
– P1 –
SHOWVIEW 123456789
DEBUT FIN
21:00 = 22:00
VN
M.
DATE CHAINE
25.12 1
TF1
: OK
VN
PROG.