JVC HR-S8965EK VCR User Manual


 
basic features 27
Return to Normal Screen
Press p or
OK
3
/
. PROGRAM COMPLETED appears on the TV screen for
about 5 seconds, then the normal TV screen appears. If the timer programme is
overlapped with another one that was already set, PROGRAM OVERLAPPED
appears on the TV screen and Err appears on the display panel.( pg. 30)
Engage Timer Mode
You must now put the VCR into Timer Mode by pressing c otherwise no
recording will take place. Make sure that the VCR turns off automatically and c
will appear on the display panel. To disengage the Timer Mode, press c again.
If a video tape with the safety tab removed is loaded, c, Play indicator (,) and
Record indicator (U) will flash. Insert another tape with the safety tab in place to
record!
If no video tape is loaded, c indicator will flash. Insert a tape to record!
If the tape reaches its end during timer recording, the recording stops and “c”,
U” and “,” on the display panel blink. Press c to disengage timer, then press
S/0on the VCR to eject the tape or press othen press <to rewind the
tape.
T
V
P
R
+
T
V
P
R
T
V
T
V
+
0000
STOP
FIN
M
E
N
U
O
K
TV/VCR
DAILY/QTDN.
VPS/PDC
AUX
WEEKLY/HEBDO
PROG
30 SEC
:
AUDIO
12
3
4
65
7
8
9
0
DATE
START
DEBUT
PR
4
1
3
E
N
T
E
R
/
E
N
T
R
E
E
EXPRESS
TV
?
2
/
LP00000-000
VCR/TV
ABC
.,/
DEF
JKLGHI MNO
TUVPQRS
WXYZ
PROG
1
0000
7
AUX
8
0
9
4
P
R
+
E
N
T
E
R
/
E
N
T
R
E
E
OK
3
/
TE PR
Press the number key 1. The Title Edit screen appears.
• You can access the Title Edit screen only when PROG.
NAVIGATION is set to ON.
( pg. 40)
Press the number key and
E to enter characters,
then press
O
K
3
/
. For details,
refer to ‘Entering Character’
on page 41.
-P1-
[0-9]: SELECT LETTERS
[x]: DELETE
[0]: CURSORg
k: OK [PROG]: EXIT
25.12 W S
Edit Programme Title
-P1-
[0-9]: SELECT LETTERS
[x]: DELETE
[0]: CURSORg
k: OK [PROG]: EXIT
25.12 21:00 BBC1
If you have set the VCR to Timer Record a
programme and have not engaged the Timer
Mode, you will see this warning appear on your
screen five minutes before the appointed start
time. To clear the display, press x.
warning If the VCR is being used as the player for
tape-to-tape dubbing, this warning screen will be
recorded by the other VCR.
-P1-
-WARNING-
TIMER RECORDING
TO START SOON
f [x]
satellite receiver users To timer-record a satellite broadcast using Express
Timer Programming:
Perform ‘Satellite Receiver Control Settings ( pg. 45).
Press
AUX (number key 0) to change TV PROG to SAT. Then press PR +/– to
enter the preset position for the satellite receiver.
You cannot set
PDC to ON.
You cannot timer-record the satellite broadcast received on the channel
position ‘0’ by the satellite receiver.
Leave the satellite receiver’s power on.
For memory capacity and Serial Recording, see
VIDEO Plus+ Timer Programming
on page24.
HR-S8965EK-EN/p23-30 4/19/03, 01:01 PM27