JVC HR-S8965EK VCR User Manual


 
advanced features64
Tuner Set
The VCR needs to find, identify and memorise all available stations in your area in order to
record programmes correctly. Once done, pressing the PR + or - buttons enables you to
jump to the available channels without going via any vacant channels. This channel search
can be done either automatically or manually. You should only need to perform either of the
following procedures if Auto Setup or Preset Download has failed to identify and record
available channels or you have moved to a new area.
Auto Channel Setup
get to the main menu Press m.
perform auto channel set Move the highlight bar to AUTO CH
SET
using the A and B buttons and press (or E).
rf and scart connection If you have chosen to connect the
VCR to the TV with both the RF Cable and a 21-pin SCART Cable
(not provided) and the TV set is in its AV mode (see the TV
manual), the
AUTO SET screen will appear on the TV and remains
there for about 4–12 minutes while the VCR searches for receivable
stations. During Auto Channel Set the
S
mark on the screen moves
from left to right.
The caption
SCAN COMPLETED appears at the end of the process for
about 5 seconds.
confirmation screen Once
Auto Channel Set has completed
its search, the confirmation screen
will appear showing the details (
PR
= Preset Number, CH = Channel Number and ID = Station Name)
of the TV stations that the process has found. The first station will
have a highlight bar over it and will be blinking. This screen and
the programme currently being broadcast on the selected station
will alternate at 8second intervals. To view the next channel, press
the A and B buttons to move the highlight bar to the
required channel.
return to normal screen Press m.
NOTES ON CHANNEL RECEPTION
incorrect station id In certain reception conditions, station names may not be stored
correctly by the VCR and Auto Guide Program Number Set may not work properly. If the Guide
Program Numbers are not set, entering PlusCode numbers, may result in an incorrect channel
being recorded.
poor reception The VCR memorises all stations found regardless of their quality. If a station’s
quality is poor, you can delete that station from the memory (see page 62).
O
K
3
/
AUTO SET
PLEASE WAIT
[MENU]:EXIT
PR
01
02
03
04
05
06
07
CH
26
33
23
30
37
[10]
a k: EDIT
a [x]: DELETE
[MENU]: EXIT
ID
BBC1
BBC2
ITV
CH4
CH5
- - - -
- - - -
PR
08
09
10
11
12
13
14
CH ID
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
[1] a k
[MENU]: EXIT
MAIN MENU
PROGRAMME NAVIGATION
MODE SET
AUTO CH SET
MANUAL CH SET
OUTPUT/INPUT SET
INITIAL SET
F
HR-S8965EK-EN/p64-69 4/19/03, 01:05 PM64