Filter
Top Products
15
Setting the Time and Date Manually
• Turn on the TV, and select the VCR channel on TV.
• Make sure TV/VCR/DVD switch has been slided to VCR/
DVD. Then press VCR to select the VCR mode. (The VCR
indicator will light)
Preparation
4
Set the month, year, hour and minute in the same
way as in step 3. Then press OK.
3
Press or repeatedly
until 26 appears. Then
press ▼ to continue.
2
Press ▲ or ▼ to select
the CLOCK SET. Then
press OK.
1
Example: Setting the clock to 11:30, 26 Oct. 2002.
Press SET UP MENU. Press ▲ or ▼ to select
the
SYS-
TEM SETUP. Then press
OK.
The step-2 will appear
when clock is not set.
• In case of an error,
press ▲ to go back to
one step and enter
again.
Notes:
• The AUTO TIME function adjusts the
clock only if the error is within 5
minutes.
• The VCR automatically adjusts the
clock setting for Daylight Saving Time
once you set AUTO TIME to ON.
Press
or to select AUTO TIME ON or OFF.
The VCR automatically corrects the clock setting every
hour once you set AUTO TIME to ON.
5
6
Press SET UP MENU repeatedly until the TV picture
appears on the screen.
7
The clock will begin operation.
You must set the date and time manually
for timer recordings if Automatic tuning
process did not set them correctly.
SELECT :
SYSTEM SETUP
LANGUAGE/SPRACHE/LANGUE
ENTER
EXIT
: OK
: MENU
CLOCK SET
SELECT :
CHANNEL SETUP
ENTER
EXIT
: OK
: MENU
VCR SETUP
AUTO REPEAT OFF
SYSTEM SETUP
TIMER REC SET
2A77501B E(12-17) 5/30/02, 9:21 PM15