Filter
Top Products
28
TIMER REC SET
DATE
START
END
CH
SPEED
PDC
15 FRI
17:30
18:00
3
LP
ON
SELECT
SET
EXIT
:
:
: MENU
OK : OK
• As long as the timer is activated (clock
symbol indicated on the display), you
cannot use the VCR. If you want to use
the VCR, first press • to deactivate the
timer.
• Not all TV Stations transmit PDC signal
all of the time, therefore it is advisable to
check before setting PDC to ON, if you
do set PDC to ON and no signal is
received your recording might not take
place at all. To check PDC status,
change to the channel on your DVD/VCR
you wish to record from, if the word
"PDC" appears on the screen for a few
seconds then that channel is
broadcasting PDC and you can set the
feature to ON.
VIDEO Plus+ Recording
The recording end-time will be set by VIDEO Plus+
automatically. However you can extend the recording
end-time manually. The time END must blink.
If it does not blink, then press
▲ or ▼ repeatedly until
the time end blinks. Then press to extend.
Recording period extension
5
Press OK after the confir-
mation. Then press SET
UP MENU repeatedly until
the TV picture appears. To
enter another programme,
repeat
steps 1 - 5.
If you have selected Daily or Weekly in step 3, then you
can select a recording date again. The date must blink.
If it does not blink, then press
▲ or ▼ repeatedly until
the DATE blinks. Then press
or repeatedly until
the desired date appears. The following date options are
available:
SUN-SAT: all dates from Sunday to Saturday, or
MON-SAT: only from Monday to Saturday, or
MON-FRI: only from Monday to Friday.
WKL-MON: each Monday, WKL-TUE: each Tuesday
WKL-SUN: each Sunday, etc.
Note:
6
Although the data is stored in the timer memory, the timer
function is not yet ready for recording. To accomplish this,
activate it by pressing •.
If no cassette tape is loaded, the
clock symbol does not appear.
:
:
:
:
:
:
:
:
:
:
SELECT : / OK
EXIT
:
MENU
15 FRI 17:30 18:00 3
:
:
:
:
SP
To record with the PDC (Programme
Delivery Control)
system
The PDC system starts
recording when it picks up a
special signal transmitted
by the broadcaster with the
TV programme – even if the
TV programme starts early,
late or runs on longer than scheduled. In step 4, press
▼ repeatedly until PDC OFF flashes, then press
or
to display "ON" for recording with PDC.
2A77501B E(24-29) 5/30/02, 9:23 PM28