JVC HR-XV1EK DVD Player User Manual


 
43
EAM
: Select : Enter
T
1 000:23
MP3
PCM
4
3
MP3 Playback
This player can play back the MP3-data
which has been recorded on CD-R or CD-
RW. To produce the MP3-data, you need a
Windows-PC with CD-ROM drive and a MP3-
encoding Software (not supplied).
The Apple-HFS-System can not be played.
Press OSD.
Then press
/ to select
MP3
and press OK (Enter).
Press / or
/
to select the desired track, then press
OK (Enter). Track is selected and play commences.
In case the folder includes more than 9 tracks, press
/
to display next track list.
To remove track list, press CANCEL.
Press
/
to select T and press number keys to
input your desired track.
5
Press 3 to end playback.
The unit records the stopped track.
Press to resume playback (from the beginning of
track).
If you press 3 again or unload the disc, the unit will clear
the stopped track.
6
Press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press .
The disc tray closes automatically and DVD/VCR turns off.
1
Press OPEN/CLOSE.
The disc tray will open.
Place a disc onto the tray.
2
Press or OPEN/CLOSE. The
disc tray closes automatically. On
the TV-screen,
and then
reading file number will appear.
Then playback will commence.
Reading will take as much time
as the number of file.
Press 3 to end playback.
NOTES:
During MP3-Playback, you can not use SEARCH, A-B
Repeat functions.
You can use Repeat(Track or All) and Random functions for
MP3 CD Playback.(See page 41 and 42)
Turn ON the TV and set to the video input mode.
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator
will light)
Preparation:
EAM
: Select : Search
T
1 000:23
MP3
PCM
1. \ CRYINI
~
1
2. \ DANGER
~
1
3. \ GITARREN
4. \ LILYWA
~
1
5. \ MERCYS
~
1
6. \ OBSESS
~
1
7. \ PINKPA
~
1
8. \ RUNNIN
~
1
T
11
Limitations on MP3 CD playback
MP3 CD is the disc that is standardized by
ISO9660, its file name must include 3-digits
extension letters, mp3.
The directory and file names of the MP3
CD must correspond to the ISO
standardized files.
This unit can read 200 files per disc. If
one directory has more than 200 files, it
reads up to 200 files, the remaining files will
be omitted.
As for multi-session disc, only the first
session can be played.
If the CD has both audio tracks and MP3
files, only audio tracks are played.
It may take more than one minute for this
unit to read MP3 files depending on its
structure.
Music recorded by Joliet Recording
Specification can be played back, the file
name is displayed (within 8 letters) on the
screen. Long file names will be condensed.
The music files recorded by Hierarchical
File System (HFS) cannot be played.
Limitations on display
The maximum number for display is 8
letters. Available letters for display are the
following: capital or small alphabets of A
through Z, numbers of 0 through 9, and _
(under score).
Notes on MP3 files
To play back MP3 CD in the recorded order,
1. Use MP3 software that records data
alphabetically or numerically.
2. Name each file including a two-digit or three-
digit number (e.g. 01 02 or 001 002).
3. Refrain from making too many sub-folders.
CAUTION:
Some MP3 CDs can not be played back
depending on the recording conditions.
The CD-R/RW that has no music data or
non-MP3 files can not be played back.
MP3 CD Information
2A77501B E(38-43) 5/30/02, 9:24 PM43