Filter
Top Products
Masterpage:Right-No-Heading
EN 21
Filename [XV38ASAG_057S-VHS.fm]
Page 21 December 14, 2004 8:42 pm
Playback Features
Still Picture/Frame-By-Frame
Playback
1 Pause during playback.
Press 9.
● If there is vertical jitter, press PR +/– on the remote control to
correct the picture.
2 Activate frame-by-frame playback.
Press 9.
NOTE:
Still picture playback stops automatically after 5 minutes to
protect the heads.
Slow Motion
While playback is paused, press and hold 9 for 2
seconds, then release. Press 9 and release again to return
to still picture.
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press PR + or – on the remote control to eliminate the
noises.
Variable Speed Search
During playback, press 5 for forward variable speed
search, or 3 for reverse variable speed search.
● The speed changes for each direction by pressing 3 or 5
repeatedly.
When pressing 5:+5x{+7x/
NTSC-EP +11x{+21x
When pressing 3:–1x]–5x{–7x/
NTSC-EP –1x]–11x{–21x
(Once
3
is pressed, reverse search starts in –1x normal
playback speed. After this process, each press of
3
changes the
search speed between –5x and –7x/NTSC-EP -11x and -21x.)
NOTE:
The search speed changes in the same way for SP, LP, and EP
modes.
Skip Search
During playback, press 1 to 6 times to skip over
unwanted sections.
Each press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
Index Search
Your unit automatically marks index codes at the beginning of
each recording. This function gives you quick access to any one
of 9 index codes in either direction.
NOTE:
Before starting, make sure the unit is in the Stop mode.
Activate Index Search.
Press 2 or 6. “2 1” or “6 1” is displayed on
the TV screen and search begins in the corresponding
direction.
● To access index codes 2
through 9, press 2 or
6 repeatedly until the
correct index number is
displayed.
Example:
To locate the beginning of B
from the current position,
press 2 twice.
To locate the beginning of
D from the current position, press 6 once.
● When the specified index code is located, playback begins
automatically.
Next Function Memory
The Next Function Memory “tells” the unit what to do after
rewinding. Before continuing, make sure the unit is in the Stop
mode.
a- For Automatic Start Of Playback
Press 3, then press 4 within 2 seconds.
b- For Automatic Power Off
Press 3, then press 1 within 2 seconds.
c- For Automatic Timer Standby
Press 3, then press # within 2 seconds.
d- For Automatic Cassette Ejection After Tape Rewind
Press 3, then press x within 2 seconds.
One Touch Replay
Press during playback.
Pressing once moves the playback position back to about 7
seconds before the current position. You can press
up to 4
times each One Touch Replay.
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch on the remote
control to the right.
ATTENTION
In the search, still, slow-motion or frame-by-frame playback
mode,
● the picture will be distorted.
● the noise bars will appear.
● there may be a loss of colour.
● you cannot hear the sound.
To resume normal playback, press 4.
To resume normal playback during a Skip Search,
press 4.
Current position
Index number
XV38ASAG_057S-VHS.fm Page 21 Tuesday, December 14, 2004 8:42 PM