JVC HR-XV38SAS DVD Player User Manual


 
Masterpage:Right-No-Heading
EN 39
Filename [XV38ASAG_06DVD.fm]
Page 39 8 January 2005 2:54 pm
Sound Effect (3D PHONIC)
Using the Sound Effect function (3D PHONIC), you can change
the sound field.
This function works only for analog audio output.
1 Access the selection menu.
Press SOUND EFFECT during playback.
The current setting appears on the TV screen.
2 Select the Sound Effect (3D PHONIC) mode.
Press SOUND EFFECT repeatedly to select the desired
mode.
Each time you press SOUND EFFECT, the Sound Effect (3D
PHONIC) mode changes as follows:
OFF]ACTION]DRAMA]THEATER](Back to the
beginning)
The selection menu disappears if no operation is done for
about several seconds.
NOTES:
The Sound Effect (3D PHONIC) function works correctly only
when playing back a DVD VIDEO disc recorded in the Dolby
Digital format. With other sources, you cannot get any effect if
you activate this function.
When playing back a DVD VIDEO disc recorded with Dolby
Digital that does not contain the rear signal, you cannot get a
correct effect even if you activate the Sound Effect (3D
PHONIC) function.
VFP function
— Adjusting the picture quality
The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programing,
picture tone or personal preference.
1 Access the VFP setting menu.
2 Select the VFP mode.
Press we repeatedly.
Each time you press we, the VFP mode changes as follows:
NORMAL]CINEMA]USER 1]USER 2](Back to the
beginning)
To adjust picture appearance manually
3 Access USER menu.
Press we repeatedly to select “USER 1” or “USER 2.”
4 Select the parameter.
Press rt repeatedly to select a parameter you want to
adjust, then press ENTER.
Adjust gradually and confirm picture appearance results are as
preferred.
VFP menu disappears and the following pop-up window
appears on the TV screen.
5 Adjust the parameter.
Press rt repeatedly to change the setting, then press
ENTER.
The current VFP settings appear again.
Repeat steps 4 and 5 to adjust other parameters.
To return to the normal screen
Press DVD PICTURE.
NOTE:
The VFP setting screen disappears if no operation is done for
more than about 10 seconds.
OFF: No effect
ACTION: Suitable for action movies and sports
programmes in which sounds dynamically
move.
DRAMA: Provides natural and warm sound. You can
enjoy movies in a relaxed mood.
THEATER: You can enjoy sound effects like in a major
theater.
Press DVD PICTURE during
playback.
The current setting appears on
the TV screen.
0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
+
3
NORMAL: Select this normally.
CINEMA: Suitable for movie.
USER 1/
USER 2:
You can adjust parameters that affect picture
appearance and store settings. Go to step 3.
GAMMA
(–3 to +3):
Adjust this if the neutral color is bright or dark.
The brightness of dark and bright portions is
maintained.
BRIGHTNESS
(–8 to +8):
Adjust this if the picture is bright or dark on
the whole.
CONTRAST
(–7 to +7):
Adjust this if the objects in far and near
positions look unnatural.
SATURATION
(–7 to +7):
Adjust this if the picture is whitish or blackish.
TINT
(–7 to +7):
Adjust this if the appearance of flesh tone is
unnatural.
SHARPNESS
(–8 to +8):
Adjust this if the picture is indistinct.
0
GAMMA
0
GAMMA
XV38ASAG_06DVD.fm Page 39 Saturday, January 8, 2005 2:54 PM