JVC InHR-J4404UM VCR User Manual


 
14
1
2
3
46
7
8
5
0
9
3
78
1
•• ••
¡
5
/
8
£
3
2
q
PLAYBACK AND RECORDING FEATURES (cont.)
Manual Tracking
Once playback begins, the VCR’s automatic tracking function is
engaged. If noise appears in the picture, you can override this
and make the adjustment manually.
ENGAGE MANUAL
TRACKING MODE
1
During playback, press the CH5
buttons on the
VCR's front panel simultaneously to cancel the
automatic tracking mode and enable manual tracking
adjust.
ADJUST MANUAL
TRACKING
2
Press CH5
on the VCR's front panel or remote. Press
lightly for fine adjust, or press and hold for coarse
adjust. Watch the screen and continue adjusting until
optimum picture and sound quality are achieved.
RE-ENGAGE AUTOMATIC
TRACKING
3
Press the CH5
buttons on the VCR's front panel
simultaneously.
When automatic tracking is re-engaged, B.E.S.T. is
automatically activated.
NOTES:
To obtain a noiseless still picture it may be necessary to adjust
tracking in slow playback and then engage Pause.
Manual tracking is possible during hands-free slow-motion.
During hands-free slow-motion playback, simply press
CH5
or
on the VCR's front panel or remote to adjust tracking.
START REPEAT
1
Press and hold PLAY (until "PLAY" blinks on the front
display panel) during playback, then release.
The entire tape is played back 20 times.
STOP REPEAT
2
To stop, press STOP at any time.
NOTE:
Pressing PLAY, REW, FF, PAUSE or PUSH JOG
or
£
also stops Repeat Playback.
CH
FF
PLAY
PAUSE
REW
Repeat Playback
PUSH JOG
PLAY
FF
PUSH JOG
CH
STOP
REW
STOP
HMS
VCR
SP
PLAY