Filter
Top Products
30
5
/
8
™
£
3
2
q
1
2
3
46
7
8
5
0
9
3
¶
4¢
78
1
•• ••
¡
Edit From A
Camcorder
You can use a camcorder as the player and your VCR as the
recorder.
MAKE CONNECTIONS
1
Connect an AV cable (not supplied) between the
camcorder’s VIDEO OUT and AUDIO OUT connectors
and your VCR’s VIDEO IN and AUDIO IN connectors.
● When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The Mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
● When using a Hi-Fi camcorder, connect its AUDIO
OUT L connector to the AUDIO IN connector on your
VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into your VCR and
the playback cassette into the camcorder.
SET RECORDER’S INPUT
MODE
3
Press NUMBER key “0” to set your VCR to AUX.
START PLAYER
4
Set the camcorder to its play mode.
START RECORDER
5
Set your VCR to its record mode.
● If you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction
manual.)
Player
EDITING (cont.)
To rear panel PAUSE
connector
Mini-plug cable (not supplied)
(JVC camcorder only)
EDIT
Camcorder
Your VCR
Recorder
NUMBER "0"
AUDIO IN
VIDEO IN
AUDIO OUT
VIDEO OUT