Filter
Top Products
24
1
2
3
46
7
8
5
0
9
3
¶
4¢
78
1
•• ••
¡
TIMER RECORDING (cont.)
You can directly program the VCR’s timer to record up to 8
shows, as far as a year in advance. Remember, the clock must
be set before you can program the timer (੬ pg. 6).
On-Screen
Timer
Programming
5
/
8
™
£
3
2
q
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
LOAD A CASSETTE
1
Make sure the record safety tab is intact. If not, cover
the hole with adhesive tape, then load.
● The VCR comes on, and the counter is reset,
automatically.
ACCESS ON-SCREEN
MENU
2
Press MENU to bring up the Main Menu screen.
ACCESS PROGRAM SET
SCREEN
3
Make sure the arrow is to
the left of "PROGRAM
SET", then press OK.
SELECT PROGRAM NUMBER
4
Press the appropriate NUMBER keys or CH
5
∞ or
PUSH JOG
%
fi to select a vacant program number, then
press OK. The first time you do this, all numbers will be
vacant, so just press OK when the screen appears.
SET PROGRAM
INFORMATION
5
Press the appropriate NUMBER keys to set the date,
start/stop time and channel number. Press CH
5
∞ or
PUSH JOG
%
fi to set AM/PM and tape speed. Then
press OK after AM/PM, channel number and tape speed
settings. The next setting that can be set begins flashing.
● Any information comprised of 1 digit (except the
channel number) should have a "0" entered before it.
● It is possible to set all information using the CH5
∞
or
PUSH JOG%
fi
buttons. (In this case, press OK after
each setting.)
Do not use the CH ∞ or PUSH JOG fi button to set
the date.
NOTES:
●
If you are using a cable box, enter the cable box
channel, not the channel to be recorded. The channel
to be recorded must be selected on the cable box.
(The cable box channel is the VCR's channel that
displays the channels received by the cable box.)
●
To timer-record cable or satellite channels through an
external tuner connected to the VCR's external input
connectors, press the NUMBER key "0" so that "AUX"
appears instead of a channel number.
**You can record selected programs at the same time
every weekday, or once a week. Before entering the
month, press NUMBER key “8” (DAILY) or “9”
(WEEKLY). Either "DAILY" or "WEEKLY" appears.
Press again and "DAILY" or "WEEKLY" disappears.
PROGRAM 1
DATE - - / - -
START - - : - - AM
STOP - - : - - AM
CHANNEL - - SP
PRESS NUMBER KEY(0-9)
OR (
5
,∞), THEN (OK)
PRESS (MENU) TO END
MENU
CH
OK
CH
OK
MENU
PUSH JOG
NUMBER
NUMBER "8"
NUMBER "9"