Filter
Top Products
33
Satellite Receiver Multi-
Brand Remote Control
The VCR's remote control can control functions on the brands
of satellite receivers listed below.
1
2
3
46
7
8
5
0
9
3
¶
4¢
78
1
•• ••
¡
TURN ON THE SATELLITE
RECEIVER
1
Turn the power on using the satellite receiver’s remote
control.
ENTER SATELLITE RECEIVER
BRAND
2
While holding down POWER on the VCR's remote
control, use the NUMBER keys to enter the satellite
receiver brand number from the chart below and then
press STOP.
Follow the example shown at bottom left.
● Once you have set the remote control to operate the
satellite receiver, you don't have to repeat this step
until you replace the remote control's batteries.
OPERATE SATELLITE
RECEIVER
3
Press CABLE and POWER in succession to see if the
satellite receiver’s power goes off as it should. If it does,
try other functions.
● To operate your satellite receiver, press CABLE first,
then press the corresponding button: POWER, CH
5
∞ and NUMBER keys (or ENTER).
● Depending on the satellite receiver you may have to
press ENTER after having pressed the NUMBER keys.
NOTES:
●
Depending on the kind of satellite receiver, there may be
cases where some or all functions cannot be operated using
the remote control.
●
It's not possible to set the remote control for both your cable
box and your satellite receiver at the same time; you can only
set the remote control to the brand of either one.
●
You have to subscribe to a satellite broadcaster to receive
satellite channels.
NUMBER
STOP
ENTER
POWER
CABLE
(Ex.) To set remote control to RCA 80:
Release
Hold
down
Press in succession
SATELLITE BRAND NAME BRAND CODE
RCA (DSS) 80
SONY (DSS) 81
PRIMESTAR 90
CABLE
7
STOP
8
/DAILY
0
/AUX
CH