Filter
Top Products
18
PLAYBACK AND RECORDING FEATURES (cont.)
1
2
3
46
7
8
5
0
9
3
¶
4¢
78
1
•• ••
¡
5
/
8
™
£
3
2
q
RESET COUNTER TO ZERO
1
Press C.RESET.
NOTE:
By pressing the DISPLAY button, you can change the
display to show the counter reading, channel number
or clock time. (Channel number is not displayed during
playback.)
Counter Memory
When activated, this feature returns the tape to counter position
“zero”.
ACTIVATE COUNTER
MEMORY
1
Press C.RESET during playback at a point you want to have
quick access to later. The counter reads “0H 00M 00S”.
Then press C.MEMORY. The Counter Memory indicator
in the front display panel lights.
RETURN TO COUNTER
POSITION ZERO
2
Press STOP (during playback), then press REW or FF.
The tape rewinds or fast-forwards and stops at approxi-
mately “0H 00M 00S” automatically.
● To cancel Counter Memory, press C.MEMORY.
Counter Reset
REW
COUNT 0:33:27
Tape Position Indicator
The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW or
perform an Index Search or Instant
ReView. The position of " " in
relation to "B" (Beginning) or "E"
(End) shows you where you are on
the tape.
NOTE:
SUPERIMPOSE must be set to ON, or the indicator will not
appear (
੬
pg. 16).
BE
+++
Next Function Memory
You can set your VCR's power to go off automatically after the
tape is fully rewound. Before starting, make sure the VCR is in
the Stop mode.
For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press POWER within 2 seconds.
NOTE:
If you want the power to be turned off automatically when the
counter reads “0
H
00
M
00
S
” (instead of at the beginning of the
tape), press C.MEMORY so that the “M” mark appears before
pressing REW.
FF
STOP
REW
FF
STOP
DISPLAY
C.RESET
C.MEMORY
POWER
POWER