Filter
Top Products
32
1
2
3
46
7
8
5
0
9
3
¶
4¢
78
1
•• ••
¡
SPECIAL FEATURES (cont.)
Cable Box Multi-Brand
Remote Control
The VCR's remote control can control functions on the brands
of cable boxes listed below. Some cable box brands have more
than one code. If your cable box does not function with a
specified code, try other codes.
TURN ON THE CABLE BOX
1
Turn the power on using the cable box’s remote control.
ENTER CABLE BOX BRAND
2
While holding down CABLE on the VCR's remote control,
use the NUMBER keys to enter the cable box brand
number from the chart at bottom left and then press
STOP.
Follow the example shown below.
● Once you have set the remote control to operate the
cable box, you don't have to repeat this step until you
replace the remote control's batteries.
OPERATE CABLE BOX
3
Press CABLE and POWER in succession to see if the
cable box’s power goes off as it should. If it does, try
other functions.
● To operate your cable box, press CABLE first, then
press the corresponding button: POWER, CH 5
∞
and
NUMBER keys (or ENTER).
● For some brands of cable box, you must press ENTER
after having pressed the NUMBER keys.
NOTES:
●
Depending on the kind of cable box, there may be cases
where some or all functions cannot be operated using the
remote control.
●
It's not possible to set the remote control for both your cable
box and your satellite receiver at the same time; you can only
set the remote control to the brand of either one.
●
You have to subscribe to a cable service to receive cable
channels.
(Ex.) To set remote control to TOCOM 01:
Press in succession
CABLE BOX BRAND NAME BRAND CODE
CURTIS 08, 09
GEMINI 17
GENERAL INSTRUMENTS 10, 11, 12, 13, 14, 15, 16, 17
JERROLD 10, 11, 12, 13, 14, 15, 16, 17
PANASONIC 03, 04, 05
RCA 03, 04, 05
SAMSUNG 17, 18
SCIENTIFIC ATLANTA 08, 09
SL MARX 17, 18
SPRUCER 03, 04, 05
TELEVIEW 17, 18
TOCOM 01, 02
VIDEOWAY 06, 07
ZENITH 06, 07
NUMBER
ENTER
POWER
STOP
CABLE
CABLE
7
STOP
1
0
/AUX
Release
Hold
down
CH