Filter
Top Products
— 28 —
Video Navigation
Other Problems
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
Title screen does not
appear for the currently
inserted tape.
● The current inserted tape has not been recorded
on this VCR.
● Tape information cannot be shown if it has not
been recorded on this VCR.
The VCR cannot search for
the correct program.
● Two (or more) tape numbers are recorded on one
tape.
● Video Navigation cannot work correctly on a tape
if it has more than one tape number. If this
happens, fast-forward the tape up to its end, eject
it, and try it again.
“MEMORY FULL” appears
on the screen when you try
to start recording.
● The VCR’s memory for Video Navigation is full. ● Check the remaining memory (
੬
pg. 18). If it is
full, delete unnecessary Video Navigation
information (
੬
pg. 17).
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
The channel cannot be
changed.
● Recording is in progress. ● Press PAUSE (
9
) to pause the recording, change
channels, then press PLAY (
4
) to resume
recording.
Even though Auto or
Semiauto Clock Set has
been performed, the clock
is incorrect.
● The clock setting data received from the host
channel is incorrect.
● Select a different host channel during Semiauto
Clock Set (
੬
pg. 7), or perform Manual Clock Set
(
੬
pg. 7).
HR-S9911U-EN.fm Page 28 Tuesday, April 16, 2002 8:14 PM