Filter
Top Products
41
42
MENU
PICTURE
SOUND
DTV
FEATURES
SET UP
DTV Menu
Timer
Edit PR
Configuration
Setup
Installation
Setup
14:00
05/05/2006
Digital Audio Output PCM
Banner Duration 2 sec
Receiver Upgrade Auto
Common Interface No CI Module
Antenna Power Off
PCM
Auto
No CI Module
Off
New software found.
Wo
uld you like to upgrade now?
In standby NoYes
Manual
Software Version
OK
Search for new
2.14.03
Downloading new software
Cancel
IMPORTANT! PREPARE USE
SETTINGS
TROUBLE?
1
2
3
4
5
6
select
Display the menu
Select “DTV”
Select “Setup”
Select an item
Switch to digital channels
Finish
1 select
2 next
1 select
2 next
DTV setup
Set
Conditional
Access
Module
Common Interface
Power supply
for the indoor
aerial
Antenna Power
Output the
Dolby Digital
signal
Digital Audio Output
Upgrade
tuner
Receiver Upgrade
PCM
: The Linear PCM
signal is output
Dolby Digital
: The Dolby Digital
signal is output
Auto
: Automatically download and
install software upgrades
Manual
: Manually download and
install software upgrades
No CI Module
: Function is not
available
Off
: Power not
supplied
On
: Power supplied
Only when the Dolby Digital signal is received
When you change the setting,
enter PIN code.
Please read “Power supply for the indoor aerial” (P. 55) before setting.
1 Press “OK” button to display the
Conditional Access Module menu
2 Follow the instructions on the
screen to set up pay-TV
The content of the menu is different depending on the broadcasting company.
For details, consult your broadcasting company
The language shown in the menu may differ to the “Language” set for the TV.
Available for setting power supply for the aerial, and upgrading the tuner
software, etc.
Please read ““Dolby Digital” output from the “DIGITAL AUDIO OUT” terminal” (P. 56) before setting.
To watch pay-TV digital channels, use the Conditional Access Module menu.
This function can only be used when pay-TV can be received in your region.
When the Conditional Access Module etc. is
inserted after subscribing to the broadcasting
company, this function is available.
“Watch pay-TV digital channels” (P. 8)
You can upgrade the tuner software as newer versions become available. Normally set to “Auto”.
This occurs at midnight when
the TV’s power is off.
To the previous
screen
Exit
Banner Duration: Select the display time for channel information (2 sec / 5 sec / 8 sec).
When JVC or the broadcasting station informs you of the new software, download it as follows.
3 Select “Yes”
1 Select “Manual”
Select “In standby” instead of “Yes” if you want to upgrade the software automatically when the TV is turned off.
Enter PIN code if needed.
If the TV has upgrade to the latest tuner software, the message “Search completed. No new software found” will appear.
1 select
2 next
1 select
2 next
“Software upgraded
successfully! TV will
now reset!”.
2 Select “Search for new”
If upgrading is not necessary,
select “OK” to finish.
1 select
2 start
41-42 19/03/2007 08:49:20