JVC LYT1300-001A DVD Player User Manual


 
EN 15
Master Page: Right
1 Make sure the players power is off.
2 Slide to open the card cover (MEMORY CARD).
3 To load a memory card, firmly insert it with its
clipped edge first.
To unload a memory card, push it once. After the
memory card comes out of the player, pull it out.
Do not touch the terminal on the reverse side
of the label.
4 Close the card cover.
To protect valuable files (available only for SD
Memory Card)
Slide the write/erase protection tab on the side of the
memory card in the direction of LOCK. This
prevents the memory card from being recorded over.
To record on this memory card, slide the tab back to
the position opposite to LOCK before loading it.
NOTES:
Be sure to use only SD Memory Cards marked
“” or MultiMediaCards marked
“”.
Some brands of memory cards are not compatible
with this player. Before purchasing a memory
card, consult its manufacturer or dealer.
Before using a new memory card, it is necessary to
FORMAT the card. (pg. 25)
A
TTENTION:
Do not insert or remove the memory card while the
player is turned on, as this may cause the memory
card to be corrupted or cause the player to become
unable to recognise whether or not the card is
installed.
Loading A Memory Card
/Unloading A Memory Card
Memory card
Clipped edge
Card Cover
(MEMORY CARD)
Label
Information On SD Memory Card
SD Memory Cards up to 64 MB have been verified
for use with this player. (As of October 2003)
Write/erase protection tab
GETTING STARTED
CU-VH1E.book Page 15 Friday, March 26, 2004 1:55 PM