Filter
Top Products
16
1.
Press the SHUTTER control to activate the shutter speed
variation facility, which is indicated by the lighting of the
SHUTTER lamp.
2.
Turn the SHUTTER control to vary the shutter speed. The
LCD display shows the shutter speed during the adjust-
ment operation.
The shutter speed can be adjusted in either STEP mode
for adjustments in steps or in VARIABLE mode for fine
adjustments.
REF.
: ● Item “5A: SHUTTER” on page 25.
● “Functions available depending on camera
models” on page 29.
STEP : This mode allows the shutter speed to be set to
one of the following fixed values.
(Variation steps: 1/100, 1/250, 1/500, 1/1000, 1/2000)
VARIABLE: Use this mode when shooting an image on a
computer monitor, etc.
(Variation range: approx 1/60 to 1/2000)
* The fixed values are variable depending on the
camera in use.
SHUTTER SPEED ADJUSTMENT
Turning the SHUTTER control can vary the shutter speed of the camera. The LCD display shows the
shutter speed during the adjustment operation.
CAMERA ADJUSTMENTS
1.
The gain is boosted according to the position of the GAIN
STEP switch as shown below. (The gain boost values
shown below are factory settings.)
LOW :0 dB (No gain boost)
MID :9 dB (Gain approximately tripled.)
HIGH: 18 dB (Gain approximately octupled.)
The gain boost values of these switch positions can be
modified to the following values.
(Available values: -3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18 dB)
REF.
: Items 5D to 5F, “GAIN LOW, MID and HIGH”
on page 25.
GAIN ADJUSTMENT
When the illumination of the object is insufficient, the electrical gain can be boosted as described
below.
M
FULL AUTO F1
SHUTTER
GAIN
F2
F3
MENU/SHUTTER GAIN
P
R
STEP
SHUTTER
MENU
PUSH-ON
DOWN UP
VARIABLE
PUSH-ON
HIGH
LOW
MID
DOWN UP
F4
BARS
1/1000
SHUTTER control
SHUTTER lamp
SHUTTER
GAIN
F3
MENU/SHUTTER GAIN
PAINT AUTO
BR
W.BA
L
WHITE
STEP
SHUTTER
MENU
PUSH-ON
DOWN UP
VARIABLE
PUSH-ON
HIGH
LOW
B
A
PRESET
MID
DOWN UP
F4
9dB
GAIN display GAIN control
GAIN lamp
GAIN STEP switch
2.
When the GAIN control is pressed, the VARIABLE mode
starts and the GAIN lamp lights up.
3.
The gain can be fine adjusted between 0.1 dB and 18 dB in
0.1 dB steps in the VARIABLE mode. Also, in this mode, the
maximum gain value can be set to 9 dB, 12 dB or 18 dB.
When the variation step is set to 1.0 dB, the gain can be
varied from 1 dB to 18 dB in 1 dB steps.
REF.
: Item "5B: V.GAIN STEP" and "5C: V. GAIN
MAX" on page 25.
● When the FULL AUTO (Full Auto Shooting) is ON, the
shutter speed becomes EEI. However, the shutter speed
is OFF in the LoLux mode.
When FAS is ON, the SHUTTER control cannot be used
to vary the shutter speed.
● When ALC+EEI is ON, the shutter speed becomes EEI. At
this time, the SHUTTER control cannot be used to vary the
shutter speed.
NOTE
The gain value set in the VARIABLE mode is applied in
priority over the gain switch setting.
NOTE
● When the FULL AUTO or ALC+EEI is ON, the gain be-
comes ALC. However, the GAIN is Lolux in the Lolux
mode. The gain cannot be varied in this mode.
● The KY-D29/KY-D29W does not function correctly accord-
ing to the GAIN settings because it is not compatible with
the 3 dB gain and variable gain functions. Do not set the
GAIN adjustment items for this model.
NOTE
The variable values vary depending on the connected
camera model.
REF.
:“Functions available depending on camera
models” on page 29.
NOTE
● The variation range is variable depending on the cam-
era in use.
● The shutter speed displayed on the RM-P210 may
be slightly different from the actual shutter speed of
the camera.
NOTE