Filter
Top Products
36
TERMINAL
SEL 1
Set to EXT.
(External
recording
function)
VTR MODE 2
(SUMMER TIME) OFF
(TERMINAL SEL 1) EXT
(TERMINAL SEL 2) WARN
(REC REMAIN) OFF
(COUNT END) OFF
PRESS (SHIFT, SET)
PRESS (MENU) TO END
7-8 Recording with External VCR Activation Signal
Recording start/stop can be controlled externally by inputting a VCR activation signal to the [SERIES/CLOCK IN] terminal on
the SR-9168U’s rear panel.
To [SERIES/CLOCK IN] terminalTo [COM] terminal
External control
equipment
Rear panel
Connection
Connect the [SERIES/CLOCK IN] terminal and [COM]
terminal on the SR-9168U’s rear panel to the external
control equipment.
VCR control signal (ground signal)
Operation
Start of recording
Stop or power off
LV: 0 V
7 RECORDING
VCR mode 2 setting screen
1 Set the function menu switch <TERMINAL SEL 1> to
“EXT” to use the external recording function.
2 Press the MENU button to switch the on-screen display
to the time/date display.
3 Load a cassette with a safety tab in place and engage
the Stop mode, the Pause mode or turn the operating
mode off.
• When a VCR activation signal (ground input) is input to
the rear panel’s [SERIES/CLOCK IN] terminal,
recording starts automatically and continues for as
long as the activation signal is input.
When the activation signal stops, the Stop mode is
engaged.
• When the activation signal is input again, recording
starts.
• When the [TIMER] indication is lit or the function is lit
or the function menu switch [TAPE END MODE] on
the VTR mode 1 setting screen is set to “REPEAT”,
this function is disabled.
• If a VCR activation signal is input while the unit is
already recording (started with the [REC] button),
recording continues and stops when the activation
signal is no longer input.