Filter
Top Products
-- 26 --
JVC VR-609
3.3 Pan/Tilt Camera Connection and Control
It is possible to control the Pan/Tilt camera without special devices.
The Pan/Tilt camera supports RS-485 and is given an ID for parallel connection.
Easy to install from the menu screen and possible to control by using the Jog Shuttle.
3.3.1 The example of connection with TK-C676 or TK-C655
Linked with a power connection, control terminal connection, and video signal output
connection. The following figure is the example of connection with 9 sets of TK-C676 or
TK-C655.
● Camera power connection.
● Control terminal connection (RS-485) : Please use a twisted-pair cable. Connect a
+terminal (TX+) / -terminal (TX-) to the RX+ / RX-terminal of a Pan/Tilt camera. The
camera connected at the end should set-up a terminus (110 Ω).
● Video signal connection (Composite)
: Checks video mode (NTSC/PAL) and inputs video signals at each input terminal.
Coaxial cable
Control signal cable
AC 24 V
power supply
TK-C676 or
TK-C655
Digital Video Recorder
VR-609
MACHINE ID : 1
Switch 8 : OFF
(RX TERM)
Monitor
MACHINE ID : 2
Switch 8 : OFF
(RX TERM)
MACHINE ID : 9
Switch 8 : ON
(RX TERM)
AC 24 V
power supply
AC 24 V
power supply
TK-C676 or
TK-C655
TK-C676 or
TK-C655
Recommended Cameras:
Manufacturer Model
JVC
TK-C676
TK-C655JVC