Filter
Top Products
-- 51 --
JVC VR-609
5.2.2.2 How to Setup
● Recording Schedule is set-up in block. Minimum block is an hour.
A time setting cannot be performed from the remote control unit. Please use
the front panel buttons.
● How to Setup Recording Schedule Block
1) As using left/right direction button, designates time block at the same channel.
As using up/down direction button or jog, designates channel block at the time
zone of 0 hour.
2) As pressing ‘DISPLAY’ button at the block to change, the following picture will
display in order.
● Appears yellow bar at the left of block.
● Appears yellow bar at the right of block.
● Disappears yellow bar at the block.
3) As pressing the left button in case yellow bar is at the left of the block :
The block extends for an hour and extended time is set-up as Recording
Schedule of present block.
When the yellow bar is located in the left side of the block and you press the
right arrow button, then the source configuration in the block will be
deleted (reduced) and the configuration in the deleted block will follow the
configuration in the left block. (But, if the current block is located in the most left
side, then the configuration of deleted block will follow the default setting.)
00 01 02 03 04 05
00 01 02 03 04 05
00 01 02 03 04 05
１
１
１
00 01 02 03 04 05
00 01 02 03 04 05
１
１
!