Filter
Top Products
-- 52 --
JVC VR-609
● When the yellow bar is located in the right side of a specific block and you
press the left arrow button, then the source configuration of the block in the
right side of the current block will copied (expanded)
(But, if the current block is located in the most right side, then the configuration
of deleted block will follow the default setting.)
● When the yellow bar is located in the right side of a specific block and you
press the right arrow button, then the source configuration of the block in the
current block will be copied (expanded) to the right block.
Ex.）Setup the schedule recording at 9:00 - 12:00 and 15:00 - 18:00.
（Attention In order to give explanation simply, all are displayed for 00:00- 24:00.
On an actual screen, it displays a part of them.）
(1) Press the Enter button when the cursor is on the schedule table.
(2) Select camera 1 by using JOG or up/down button. Press the display button, and a
yellow bar is displayed on the position at 00:00
(3) Press right button, and move it to the position of 09.
(4) Press display button and a yellow bar is displayed on the right-hand side of 23
(23:59).
(5) Press left button, and move it to the position of 12. Press display button, and a
yellow bar will disappear.
(6) Press right button, and move the specific block.
(7) Press display button, and a yellow bar will be displayed on the left-hand side of a
specific block.
(8) Once again, press a display button, and a yellow bar will be displayed on the
right-hand side of 23 (23:59).
(9) Press left button, and move it to the position of 15. Press display button, a yellow
bar will disappear.
00 01 02 03 04 05
00 01 02 03 04 05
１
１
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
１
１
１
１