Filter
Top Products
-- 58 --
JVC VR-609
● How to Setup
ⓐ Jog direction of field setup.
ⓑ The user field setup is moved to the place by jogging. The first
location and the last location can be selected by clicking ENTER.
ⓒ Area field setup is moved to the place by jogging and can check the
field by using ENTER.
ⓓ After setup is finished, move to the higher level menu by clicking
EXIT.
Jog Direction
X-axis
Direction Button
Y-axis
Direction Button
Motion must be clicked on Recording Events. After detecting motion by
Motion Area, Sensitivity and Sensing Speed, recording is started.
● Sensitivity
Sensitivity refers to the sensitivity to motion. Sensing Speed is the speed of
motion. Possible to set-up a range from 1 to 10. (1=Low/Slow, 10=High/Fast.)
How to Setup
ⓐ Move to Sensitivity or Sensing Speed by using Jog then press the enter
button for setup value.
ⓑ After setup is finished, move to the previous menu by clicking EXIT.
Sensitivity is detected sensitive changing in proportion to value.
Sensing Speed is no reaction to fast changing because
renewal speed is slow down as increasing Sensing Speed value.
If a setup is completed, please be sure to check real operation.
When an area setting screen is opened during recording, even if there is no
motion in an image. Although the detection log may be recorded, the
Motion-Detection Recording does not work.
!
!