Filter
Top Products
28
4.2.3 Alarm Recording
Take the following steps to activate the programmed alarm recording. For ALM OPERATION,
REC RATE, REC QUALITY, AUDIO, ALM TYPE, ALM DURATION, and PRE-ALARM settings,
please refer to section 5.2 for more details.
(1) Press the Setup button
to enter the MAIN MENU.
(2) Select ALARM and press the Enter button
to enter the ALARM SETTING.
(3) Set the desired REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION for use. If
audio is required, set AUDIO to ON. If pre-alarm recording is required, set PRE-ALARM to
ON.
(4) To activate the alarm recording, set ALM OPERATION to ON. To deactivate it, set ALM
OPERATION to OFF.
4.2.4 Externally triggered Recording
By connecting the RECORD IN of ALARM I/O on the rear panel of the DVR, you can
activate/deactivate the recording function of a DVR. The file will be kept with a prefixed “R”.
Please refer to section 2.3 for more details.
* About the location of the buttons, please refer to Page 10 2.1 Front View.
MAIN MENU
RECORD
ALARM
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO ALARM PAGE
ALARM SETTING
ALM OPERATION : OFF
REC RATE : 20F/S
REC QUALITY : BEST
AUDIO : OFF
ALM TYPE : NO
ALM DURATION : 0 SEC
PRE- ALARM : OFF
MAIN PAGE
ALARM REC ENABLE