Filter
Top Products
62
10. Network Viewer and Image Viewer
This section provides instructions for installing and using the Network Viewer, and Image Viewer,
which are included with the VR-601. The programs can be operated by a selected PC equipped with
the following requirements.
1. Intel Pentium 233MHz at least.
2. 32 MB RAM
3. Window 95, 98, NT, ME, 2000 and XP.
4. 4 MB Video card capable of 24-bit true color display.
5. 5 MB free hard-disk space for software installation.
6. 10-base T network for LAN operation.
10.1 The Network Viewer
10.1.1 Introduction to Network Viewer
The Network Viewer allows you to potentially access 16 units of the VR-601 from a remote
desktop or a laptop in a TCP/IP networking environment. It can perform the following functions.
View live images from the VR-601
Store, search, and review recorded video from the VR-601 HDD.
Change the regular record, event record, and timer properties.
Before you are ready to view images from a desktop, you need to have your VR-601 networked
by obtaining a 10 base Ethernet data cable (Standard RJ-45) to connect the VR-601 to your
LAN/WAN. Now enter the main menu to set the IP address.
RJ-45 PIN configuration for Ethernet
PIN NO. PIN Assignment
1.
TX +
2.
TX -
3.
RX +
4.
Not Connected
5.
Not Connected
6.
RX -
7.
Not Connected
8.
Not Connected
VR-601
PC
RJ-45
1 2 3 4 5 6 7 8
RJ-45 socket