Filter
Top Products
45
5.3 CLOCK / TIMER
The DVR provides a weekly table, consisting of two periods of time each day for scheduled
recording. This option allows you to set the time each day that the DVR will start and stop recording.
CLOCK:
This entry allows users to set the system time.
NOTE: Clock data is retained for about 3 months after the 15-hour power supply is used up
(Operate On mode).
REC ENABLE:
This option enables/disables the programmed scheduled recording.
ON: Enables the scheduled recording.
OFF: Disables the scheduled recording.
TIMER:
This entry allows users to program the time each day that the DVR will start and stop recording. There
are two time periods each day available for scheduling. The time is displayed in a 24-hour clock format.
If there is a time overlapping showing between two continual time period settings, the device will
automatically combine the two time-period settings into one combined time-period setting.
MAIN MENU
RECORD
ALARM
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO TIMER PAGE
CLOCK / TIMER
CLOCK : SET
REC ENABLE : OFF
TIMER : SET
MAIN PAGE
TIMER REC ENABLE
REC SCHEDULE
START END START END
S :06:00-16:00 12:00-18:00
REC SCHEDULE
START END START END
S :06:00-18:00 00:00-00:00