Filter
Top Products
21
3-2 Video Setup-continued
3 Initial Settings
Channel Search Setting
Channel Search is a tuner search and allows a channel to be confirmed.During initial setup, this DVD Recorder will
select available TV channels. Yet, if more channels become available in your area, you may need to repeat the Channel
Search to update the available channels.
NOTE:
1.While doing Channel Search, it will erase and replace all previously stored channels.
2.Before doing Channel Search, make sure if SOURCE is the same with your setting. (CABLE or ANTENNA)
1 Press SETUP in the stop mode.
2 Press / to select “Video Setup” and press .
3 Press / to select “Channel Search” then press .
4 Select “Confirm” to do TV Channel Search or “Cancel” to undo TV Channel Search.
To return to the SETUP MENU screen
Press button.
To finish the setup operation
Press SETUP to exit from SETUP MENU screen.
Add/Del Channels Setting
1 Press SETUP in the stop mode.
2 Press / to select “Video Setup” and press .
3 Press / to select “Add/Del CHs” then press .
4 Press / to choose the preferred channel, and press / for quick search.
5 Press to add or delete the selected channel.
To return to the SETUP MENU screen
Press button.
To finish the setup operation
Press SETUP to exit from SETUP MENU screen.
NOTE:
If you delete a channel, you can use CH+/CH- on the remote control to skip the deleted channel.