Filter
Top Products
36
SYMPTOM [DVD] REMEDY
PLAY does not start playback even when • This may be a result of the parental lock function that has been set. Confirm the “PARENTAL” setup.
title is selected.
Audio soundtrack and/or subtitle language is • If the audio soundtrack and/or subtitle language does not exist on the disc, the language selected at the initial
not the one selected at the initial settings. settings will not be seen/heard.
No subtitles. • Subtitles appear only with discs that contain them.
• Subtitles are hidden from the TV screen. Press SUBTITLE to display the subtitles.
Alternative audio soundtrack (or subtitle) • An alternative language can not be selected may result of no more than one language available.
languages cannot be selected.
Angle cannot change. • This function depends on software availability. Even if a disc has a number from angles recorded, these angles
may be recorded for specific scenes only.
No sound when connecting to • Check if the disc supports 5.1 Channel.
5.1 Channel speaker • Check if the speaker is properly connected.
• Check if the audio output setting is right.
5-1 Troubleshooting-continued
5 For Your Reference
No key operation (by the DVD Recorder and/ • Turn the unit off and then back to on. Alternatively, turn off the unit, disconnect the AC power cord and then
or the remote control) is effective. re-connect it. (The player may not be operating properly due to lightning, static electricity or some other
external factor.)
No picture and sound (for recorded disc) • Check if this DVD Recorder and outer equipments are properly connected.
• Check if the schedule recording setting is correct.
• Check if using the correct recordable disc.(DVD+RW/DVD+R)
• Check if power set to stand-by mode while using schedule recording.
• Check if the disc has been closed. (only for DVD+R disc)
Distorted picture or no image • Check if the TV system setting is correct.
• Check If you set output format in “Progressive Scan”, then you have to set “Component” in the video output
setting. The acutual output format must match to the output format setting.
OSD setting doesn’t be excuted • Some setting must be stored by pressing left button. Recheck it.
Wrong time • Reset time.
SYMPTOM [Recording] REMEDY