Filter
Top Products
10
FIRST INSTALLATION
First switch your TV set on and select the AV channel slot. Connect your receiver to the mains and switch it
on using the power switch on the front of the receiver. The following display appears:
Press the
button to start the fi rst installation. The following display appears:
Before using your receiver for the fi rst time, read the “Safety Instructions” and
“Connection and Set-up” sections.
The “Connection Examples” section provides a sample confi guration.
Do not connect the receiver to the power supply until all installation work has been
properly carried out.
The guidance given in the “First Installation” section assumes that the receiver
has been properly connected as per the “Safety Instructions” and “Connection and
Set-Up” sections.