Kathrein UFC 861si Satellite TV System User Manual


 
6
RECEIVER FEATURES/SCOPE OF SUPPLY
The multi-functional cable receiver UFC 861 receiver is equipped with two independent reception and
signal processing systems as well as a computer hard disk with a capacity of 160 GByte, allowing one to
download over 100 hours of TV and radio programmes, and to view these as often as wanted without any
loss in quality, either at the same time or time-delayed (timeshift function).
The Conax decoding system is embedded in the integrated card reader. In addition, a Common Interface
for one CA module allows reception of further pay-TV programmes. The receiver‘s 16-digit alphanumeric
display shows the channel names, while 16 status icons inform you on the current receiver state (e.g.
Dolby Digital, timer, ...)
The receiver is tted with an optical audio output so that the Dolby Digital data stream AC 3 can be
transmitted to a Dolby Digital stereo system.
The distinctiveness of this multi-talent arises from the receiver’s wide range of features, such as timeshift,
PIP (picture-in-picture display), transmission of the MPEG data stream to a PC, transfer, playback and
saving of MP3 les. The JPEG viewer allows you to save your pictures to the hard disk and create a slide
show.
Ethernet connection: Playback of MP3 and JPEG les as well as of recordings, VLC streaming,
software updates and channel list editing via PC/laptop.
The „File Sharing“ feature is enabled using the programme “MFServer”, which is integrated in the PVR
Manager. The programme can be downloaded free of charge from the Kathrein website.
The multi-function control on the front panel allows complete on-unit control.
The receiver‘s operational system is LINUX based and offers additional convenient functions.
- UFC 861si
- Remote control RC 660
- Scart cable
- HF/RF loop-through cable for loop-through operation
- 2 Batteries AAA 1.5 V
- Power supply cable
- Operating manual
PRODUCT PACKAGE